Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF PRO 6000S — Trang 14/26

Code: EC23 260E

Description: GAP adjustment error (support number : 4801)
Causes: Abnormity is detected at GAP adjustment.
Remedy: 1 Check the cable connection of MULTI SENSOR UNIT. Proper connection Replace MULTI SENSOR UNIT. Improper connection Connect the cable.

Code: EC23 2F11

Description: Multi sensor I2C bus communication error (support number : 4801)
Causes: Communicating with multi sensor related hard ware, such as LED driver and multi sensor EEPROM, is failed.
Remedy: 1 Check the cable connection of MULTI SENSOR UNIT. Proper connection Replace MULTI SENSOR UNIT. Improper connection Connect the cable.

Code: EC23 2F18

Description: Carriage board I2C bus communication error (support number : 4801)
Causes: I2C writing and reading to ICs on the carriage board is failed.
Remedy: 1 Perform [DIAGNOSIS > CR_SYSTEM_CHECK] to check broken wires of FLEXIBLE CABLE UNIT. Without broken wires Replace CARRIAGE UNIT. With broken wires Replace FLEXIBLE CABLE UNIT.

Code: EC23 2F32

Description: Abnormal multi sensor error (support number : 4801)
Causes: Abnormity is detected in multi sensor EEPROM reading at each automatic adjustment, paper edge detection, GAP adjustment, and starting up.
Remedy: 1 Check the cable connection of MULTI SENSOR UNIT. Proper connection Replace MULTI SENSOR UNIT. Improper connection Connect the cable.

Code: EC24 4049

Description: Abnormal temperature error by temperature and humidity sensor (support number : 8200) Memo : Remove the error in service mode after handling.
Causes: Abnormity is detect at reading temperature.
Remedy: 1 Check the cable connection of SENSOR, HUMIDITY. Proper connection Replace SENSOR, HUMIDITY. Improper connection Connect the cable.

Code: EC24 404A

Description: Abnormal humidity error by temperature and humidity sensor (support number : 8200) Memo : Remove the error in service mode after handling.
Causes: Abnormity is detected at reading humidity.
Remedy: 1 Check the cable connection of SENSOR, HUMIDITY. Proper connection Replace SENSOR, HUMIDITY. Improper connection Connect the cable.

Code: EC24 404B

Description: Temperature and humidity sensor disconnection error (support number : 8200) Memo : Remove the error in service mode after handling.
Causes: Abnormity is detected at reading temperature and humidity.
Remedy: 1 Check the cable connection of SENSOR, HUMIDITY. Proper connection Replace SENSOR, HUMIDITY. Improper connection Connect the cable.

Code: EC25 2F16

Description: Mist fan error (support number : 4801)
Causes: Abnormity is detected at reading humidity.
Remedy: 1 Check the cable connection of MIST FAN. Proper connection Go to 2. Improper connection Connect the cable. 2 Replace the parts below. <24. model> MIST FAN DUCT UNIT 2 <44. model> MIST FAN DUCT UNIT 1, MIST FAN DUCT UNIT 2 <60. model> MIST FAN DUCT UNIT 2 x 2 The problem is resolved Complete. The problem is not resolved Replace MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie