• Code: 03030000-2E21
• Description: IEEE1394 error. The IEEE1394 interface is faulty.
• Causes: IEEE1394 interface board or main controller PCB.
• Remedy: 1. Turn off the printer, and then turn it on again. 2. IEEE1394 interface board Remove the IEEE1394 interface board, nstall it again, and then turn on the printer, If the trouble persists, replace the IEEE1394 interface board. 3. Replace the main controller PCB.

• Code: 03060000-2E14
• Description: Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver.
• Causes: Media type or main controller PCB
• Remedy: 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB.

• Code: 03060000-2E16
• Description: Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver.
• Causes: Media type or main controller PCB
• Remedy: 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB.

• Code: 03060200-2E03
• Description: Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver.
• Causes: Media type or main controller PCB
• Remedy: 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB.

• Code: 03060200-2E0B
• Description: Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver.
• Causes: Media type or main controller PCB
• Remedy: 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB.

• Code: 03060A00-2E00
• Description: Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver.
• Causes: Media type or main controller PCB
• Remedy: 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB.

• Code: 03060A00-2E01
• Description: Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver.
• Causes: Media type or main controller PCB
• Remedy: 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB.

• Code: 03060A00-2E0E
• Description: Roll media unit uninstallation. The auto roll feed unit cannot be detected.
• Causes: Roll feed unit PCB, connector, or main controller PCB
• Remedy: 1. Cable continuity check If continuity of the cable between the roll feed unit PCB and the connector is abnormal, replace the cable. 2. Cable continuity check If continuity of the cable between the connector and the main controller PCB is abnormal, replace the cable. 3. Replace the roll feed unit PCB. 4. Replace the connector. 5. Replace the main controller PCB.