Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF771 — Trang 18/39

Code: 2E0C

Display: Manual printing is selected, but a roll is loaded. Press Load/Eject and remove the roll.
Description: Paper mismatch (cut sheet) 1. Print data having a manual feed print specification has been received at the completion of roll paper pickup. 2. Print data having a manual feed print specification has been received when there is roll paper printout. 3. Cut sheet data has been received when the media take-up unit is in use.
Remedy: Check the paper that is actually loaded on the paper and the paper feed setting of the driver.

Code: 2E0E

Display: No Roll Feed Unit. Turn printer off and install roll feed unit.
Description: Roll paper unit not installed The unit has received print data having a roll paper print specification when it had started without a roll unit being connected to it.
Remedy: 1. Check the roll unit, and remove, install or replace the roll unit. 2. Check I/O mode (roll unit detection).

Code: 2E0F

Display: Top cover is open. Turn off printer, wait a while, and turn it on again.
Description: The top cover is abnormally open.
Remedy: Check the cover. Check the sensor (I/O mode).

Code: 2E10

Display: Ink tank cover is open. Turn off printer, wait a while, and turn it on again.
Description: Ink tank cover error open (continued use allowed) The ink tank cover opened while performing any operation, such as printing and suctioning.
Remedy: Close the ink tank cover. Check the sensor (I/O mode).

Code: 2E11

Display: Carriage Cover is open.
Description: Carriage cover open error A carriage cover open has been detected.
Remedy: Close the carriage cover. Check the sensor (I/O mode).

Code: 2E12

Display: Rel lever is in wrong position. Turn off printer, wait, then turn on again.
Description: Faulty release lever The state of the release lever up (released) has been detected.
Remedy: Push down the release lever. Check the sensor.

Code: 2E14

Display: Wrong paper size. Check paper size setting on computer. Online: Print Stop: Stop Printing
Description: Paper mismatch (size or width) The paper size specified for the [Print to meet the paper width] setting of the driver on receiving print data and the width of the roll paper actually fed did not match.
Remedy: Check the paper that is actually loaded on the printer and the paper size setting of the driver.

Code: 2E15

Display: Wrong paper type. Stop: Stop Printing Load/Eject: Change Paper.
Description: Paper mismatch (type) (on adjustment) The second and subsequent sheets of paper have been fed as a paper type different from the first sheet when LF adjustment was made with cut sheet.
Remedy: Equalize the paper types for the first and second sheets with each other in adjustment printing.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie