Description: Image process device error
JBIG decode error
Remedy: 1. Delete the current job.
2. Turn OFF and then ON the main power.
3. Check connection of Main Controller PCB.
4. Replace the DDR-SDRAM, the HDD and Main Controller PCB (PCB2) at the same time.
Description: Image process device error
Error at software decoding
Remedy: 1. Delete the current job.
2. Turn OFF and then ON the main power.
3. Check connection of Main Controller PCB.
4. Replace the DDR-SDRAM, the HDD and Main Controller PCB (PCB2) at the same time.
Description: Device timeout
An image synchronous signal from the Main Controller PCB to the Reader is not received within 30 seconds.
Remedy: 1. Turn OFF and then ON the main power.
2. Check the connection of the Main Controller PCB (including the flat cable).
3. Replace the flat cable.
4. Replace the Main Controller PCB (PCB2).
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.