Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 4225 — Trang 22/31

Code: E5F6-8005

Description: Pushing position error
The paper pushing plate leading edge position sensor does not turn OFF when the paper pushing plate motor has been driven for 0.5 sec.
Remedy: 1. The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. 2. The paper pushing plate drive mechanism is faulty. 3. The paper pushing plate motor (M8) is faulty. 4. The saddle stitcher controller PCB is faulty.

Code: E5F6-8005

Description: Pushing position error
The paper pushing plate leading edge position sensor does not turn OFF when the paper pushing plate motor has been driven for 0.5 sec.
Remedy: 1. The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. 2. The paper pushing plate drive mechanism is faulty. 3. The paper pushing plate motor (M8) is faulty. 4. The saddle stitcher controller PCB is faulty.

Code: E602

Description: Hard disk error
Remedy: Hard disk error

Code: E604-0000

Description: Insufficient memory
Insufficient memory (require 1024 MB).
Remedy: DDR2-SDRAM

Code: E609-0008

Description: Insufficient memory
Temperature of the HDD does not rise to the specified temperature within the specified period of time at the time of startup.
Remedy: HDD.

Code: E609-0009

Description: Hard disk error
At the time of recovery from sleep, it does not reach to the specified temperature
Remedy: HDD.

Code: E610

Description: Failure of the HDD encryption key (hardware configuration error/initialization error/encryption key error/encryption processing error)
Remedy: Turn OFF and then ON the power.

Code: E611-0000

Description: Rebooting due to SRAM corruption when executing a transmission job that secures disconnection of the power
In the case that reboot is repeated at recovery from power down because SRAM information is corrupted and the job information saved on SRAM cannot be read, the phenomenon that the communication is repeated occurs.
Remedy: Clear SRAM to erase the job that secures disconnection of the power.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie