Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 4225 — Trang 24/31

Code: E711-0001

Description: UFDI communication error
Communication system error (reception time out error/ checksum error etc.)
Remedy: 1. Check the cable. 2. Replace the DC Controller PCB (UN2). 3. Replace the Finisher Controller PCB.

Code: E711-0002

Description: IPC communication error
Communication system error (packet error occurs without the request of initialization)
Remedy: 1. Check the cable. 2. Replace the DC Controller PCB (UN2). 3. Replace the Finisher Controller PCB.

Code: E713-0000

Description: Erroneous communication with finisher (retry error)
The communication does not restart by the error retry after the communication failure with the finisher.
Remedy: 1. Check the cable. 2. Replace the DC Controller PCB (UN2). 3. Replace the Finisher Controller PCB

Code: E713-0001

Description: Erroneous communication with finisher (transmission retry error)
The communication does not restart by the error retry after the communication failure with the finisher
Remedy: 1. Check the cable. 2. Replace the DC Controller PCB (UN2). 3. Replace the Finisher Controller PCB.

Code: E713-0002

Description: Erroneous communication with finisher (transmission data error)
The communication does not restart by the error retry after the communication failure with the finisher.
Remedy: 1. Check the cable. 2. Replace the DC Controller PCB (UN2). 3. Replace the Finisher Controller PCB.

Code: E713-0004

Description: Erroneous communication with finisher (reception error)
The communication does not restart by the error retry after the communication failure with the finisher.
Remedy: 1. Check the cable. 2. Replace the DC Controller PCB (UN2). 3. Replace the Finisher Controller PCB.

Code: E713-0010

Description: Erroneous communication with finisher (reception error)
The communication does not restart by the error retry after the communication failure with the finisher.
Remedy: 1. Check the cable. 2. Replace the DC Controller PCB (UN2). 3. Replace the Finisher Controller PCB.

Code: E713-0011

Description: Erroneous communication with finisher (reception error)
The communication does not restart by the error retry after the communication failure with the finisher.
Remedy: 1. Check the cable. 2. Replace the DC Controller PCB (UN2). 3. Replace the Finisher Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie