Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 4225i — Trang 4/31

Code: E197-0001

Description: Error in communication of Laser Driver PCB
Communication error with image PCB for factory (Serial communication error)
Remedy: 1. Check the cable. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB (UN2).

Code: E202-0001

Description: There is an error in the detection of the CCD home position.
The attempt to detect the home position fails when the CCD is moved forward.
Remedy: 1. Disconnect and then connect the flexible cable(Reader Controller PCB (UN4)-Main Controller PCB 2 (UN14)). 2. Replace the flexible cable. 3. Replace the CCD HP sensor (S11). 4. Replace the Polygon Motor (M11). 5. Replace the Reader Controller PCB (UN4). 6. Replace the Main Controller PCB 2 (UN14).

Code: E202-0002

Description: There is an error in the detection of the CCD home position.
The attempt to detect the home position fails when the CCD is moved back.
Remedy: 1. Disconnect and then connect the flexible cable(Reader Controller PCB (UN4)-Main Controller PCB 2 (UN14)). 2. Replace the flexible cable. 3. Replace the CCD HP sensor (S11). 4. Replace the Polygon Motor (M11). 5. Replace the Reader Controller PCB (UN4). 6. Replace the Main Controller PCB 2 (UN14).

Code: E225-0000

Description: The light intensity of the CCD is faulty.
The light intensity of the CCD during shading is under the specified level.
Remedy: 1. Disconnect and then connect the flexible cable. 2. Replace the flexible cable. 3. Replace the CCD Unit. 4. Replace the Reader Controller PCB (UN4). 5. Replace the Main Controller PCB 2 (UN14).

Code: E227-0001

Description: The reader unit power supply (24V) is faulty.
At time of power-on, the 24V port is off.
Remedy: 1. Disconnect and then connect the power supply harness connector. (J504/J3/J114) 2. Replace the Power Supply PCB (UN1).

Code: E227-0002

Description: The reader unit power supply (24V) is faulty.
At the start of a job, the 24V port is off.
Remedy: 1. Disconnect and then connect the power supply harness connector.(J504/J3/J114) 2. Replace the Power Supply PCB (UN1).

Code: E227-0003

Description: The reader unit power supply (24V) is faulty.
At the end of a job, the 24V port is off.
Remedy: 1. Disconnect and then connect the power supply harness connector.(J504/J3/J114) 2. Replace the Power Supply PCB (UN1).

Code: E227-0004

Description: The reader unit power supply (24V) is faulty
When a load is being driven, the 24V port is off.
Remedy: 1. Disconnect and then connect the power supply harness connector.(J504/J3/J114) 2. Replace the Power Supply PCB (UN1).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie