Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 4535i — Trang 61/64

Code: 750-0001-05

Description: System software error
Causes: Model information of the DC Controller did not match the notification from the controller.
Remedy: Reinstall the system software using SST or a USB memory.

Code: 753-0001-00

Description: Download Error
Causes: Update of the system software failed.
Remedy: Perform the following in the order while checking whether the error is cleared. 1. Turn OFF and then ON the main power. 2. Reinstall the system software using SST or a USB flash drive. 3. Replace the FLASH PCB, and reinstall the system software. 4. Collect debug log and contact the sales company.

Code: 753-0001-05

Description: Download error
Causes: System Software Update Error Error occurs when updating system software of uninstalled options
Remedy: [Remedy] 1. Turn OFF and then ON the main power. 2. Reinstall the system software using SST or a USB memory. 3. Replace the FLASH PCB, and reinstall the system software. 4. Collect debug log and contact the sales.

Code: 760-0001-00

Description: Main Controller PCB internal error
Causes: An error was detected in the Main Controller PCB.
Remedy: Check/replace the Main Controller PCB

Code: 800-0000-05

Description: Power condition unmatched error between Main Controller PCB and DC Controller PCB
Causes: The power of DC controller PCB still keep ON even if it reaches 90 sec after detecting the power OFF by the main controller PCB.
Remedy: [Remedy] 1. Wait till the power is turned off. 2. Turn the main power switch ON.

Code: 804-0000-00

Description: Power Supply Fan error
Causes: It was detected that the Supply Fan was locked.
Remedy: [Related parts] R1.00 - Harness between the AC Driver PCB (UN30/J117) and the Power Supply Cooling Fan (FM5/ J712) - Power Supply Cooling Fan (FM5) - AC Driver PCB (UN30) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 804-0000-05

Description: Failure of the Power Supply Cooling Fan (FM5)
Causes: When lock signal is detected for 5 sec while the Power Supply Cooling Fan (FM5) is stopped. * The same condition is detected after the error retry is performed.
Remedy: [Related parts] - Harness connecting from the DC Controller PCB (UN2/J117) to the Power Supply Cooling Fan (FM5/J712) - Power Supply Cooling Fan (FM5) [Remedy] 1.Check/replace the related harness/cable, connector and parts. 2.Replace the Power Supply Cooling Fan.

Code: 804-0001-05

Description: Unstable rotation of the Power Supply Cooling Fan (FM5)
Causes: The fan stop signal is detected for 5 minutes or more and the retry operation fails 4 times continuously after generating the ON signal of the Power Supply Cooling Fan (FM5).
Remedy: [Related parts] - Harness connecting from the DC Controller PCB (UN2/J117) to the Power Supply Cooling Fan (FM5/J712) - Power Supply Cooling Fan (FM5) [Remedy] 1.Check/replace the related harness/cable, connector and parts. 2.Replace the Power Supply Cooling Fan.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie