Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 4551i — Trang 33/64

Code: 674-0011-07

Description: Fax Board communication error
Causes: A communication error occurred when starting the Timer Device used for fax.
Remedy: Check/replace the Main Controller PCB

Code: 674-0020-07

Description: Fax Board communication error
Causes: An error occurred in the modem IC used for fax.
Remedy: [Related parts] R1.00 - Harness between the Fax Board and the Riser PCB - Fax Board - Riser PCB - Main Controller PCB [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 674-0030-07

Description: Fax Board communication error
Causes: Check sum error
Remedy: System software download for 2 line FAX

Code: 674-0100-07

Description: Fax Board communication error
Causes: After completion of fax communication, writing of the communication information (log) failed, and the log could not be read.
Remedy: Turn OFF and then ON the main power. [CAUTION] The previous communication information (log) will be cleared by turning OFF and then ON the main power.

Code: 674-0300-07

Description: Fax configuration error
Causes: It was detected that there was a Fax Board for multiple lines installed while the IP Fax license was enabled.
Remedy: 1. Remove the Fax Board for multiple lines to use the machine as an IP Fax model. 2. Uninstall the IP Fax license to use the machine as a G3 Fax model.

Code: 674-0301-07

Description: Fax configuration error
Causes: It was detected that there was no 1-line Fax Board installed while the IP Fax license was enabled.
Remedy: 1. Install the Fax Board (1-line) to use the machine as an IP Fax model. 2. Uninstall the IP Fax license and install the G3 Fax Board to use the machine as a G3 Fax model.S15

Code: 677-0001-00

Description: Print server error
Causes: Abnormality detected on the exhaust fan operation of printer server
Remedy: 1. Check supplying power to the exhaust fan 2. Exhaust fan replacement

Code: 677-0003-00

Description: Print server error
Causes: An error in the fan of the Print Server was detected.
Remedy: [Related parts] R1.00 - Print Server Fan - Main Controller PCB [Remedy] Check/replace the related harness/cable, connector and parts.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie