Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 500i — Trang 15/20

Code: E740-0002

Description: Ethernet Board error
Invalid MAC address
Remedy: 1. Replace the LAN card

Code: E740-0003

Description: Ethernet Board error
Invalid MAC address
Remedy: 1. Replace the LAN card

Code: E743-0000

Description: DDI communication error
SCI error, reception data NG, reception timeout, SEQ timeout error
Remedy: 1. Turn OFF and then ON the power.
2. Check connection of the cable between the Reader and the Controller.
3. Check voltage (+24V and +12V) on the Reader Controller PCB.
4. Replace the Reader Controller PCB (PCB3).
5. Replace Main Controller PCB (PCB2).

Code: E744

Description: Language file error
Remedy:

Code: E746-0021

Description: Engine ID error
Self-check error of Image Analysis Board (HW board used for PCAM)
Remedy: 1. Replace the Image Analysis Board (HW board used for PCAM).
2. As a temporary measure, remove the Image Analysis Board and get in service mode:
COPIER > OPTION > LCNS-TR > ST-JBLK (Lv2); set ST-JBLK from 1 to 0, and turn OFF and then ON the power.

Code: E746-0022

Description: Engine ID error
Wrong version of Image Analysis Board
Remedy: 1. Update the firmware of the Image Analysis Board.
2. As a temporary measure, remove the Image Analysis Board and get in service mode:
COPIER > OPTION > LCNS-TR > ST-JBLK (Lv2); set ST-JBLK from 1 to 0, and turn OFF and then ON the power.

Code: E746-0023

Description: Engine ID error
No reply from the Image Analysis Board
Remedy: 1. Check if the Image Analysis Board is correctly installed.
2. Turn OFF and then ON the power.
3. If the problem is not fixed, replace the Option Board.
4. As a temporary measure, remove the Image Analysis Board and get in service mode:
COPIER > OPTION > LCNS-TR > ST-JBLK (Lv2); set ST-JBLK from 1 to 0, and turn OFF and then ON the power.

Code: E746-0024

Description: Engine ID error
Operation error of the Image Analysis Board
Remedy: 1. Turn OFF and then ON the power.
2. If the problem is not fixed, replace the Image Analysis Board.
3. As a temporary measure, remove the Image Analysis Board and get in service mode:
(Lv2) COPIER > OPTION > LCNS-TR > ST-JBLK ; set ST-JBLK from 1 to 0, and turn OFF and then ON the power.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie