• Code: E315-0007
• Description: Image process device error
  JBIG encode error
• Remedy: 1. Turn OFF and then ON the main power.
  2. Check connection of Main Controller PCB.
  3. Replace Main Controller PCB (PCB2).

• Code: E315-000d
• Description: Image process device error
  JBIG decode error
• Remedy: 1. Delete the current job.
  2. Turn OFF and then ON the main power.
  3. Check connection of Main Controller PCB.
  4. Replace the DDR-SDRAM, the HDD and Main Controller PCB (PCB2) at the same time.

• Code: E315-000e
• Description: Image process device error
  Error at software decoding
• Remedy: 1. Delete the current job.
  2. Turn OFF and then ON the main power.
  3. Check connection of Main Controller PCB.
  4. Replace the DDR-SDRAM, the HDD and Main Controller PCB (PCB2) at the same time.

• Code: E315-000f
• Description: Image process device error
  Error at MemoryCopy
• Remedy: 1. Turn OFF and then ON the main power.
  2. Check connection of Main Controller PCB.
  3. Replace Main Controller PCB (PCB2).

• Code: E315-0027
• Description: Image process device error
  ROTU timeout error
• Remedy: 1. Turn OFF and then ON the main power.
  2. Check connection of Main Controller PCB.
  3. Replace Main Controller PCB (PCB2).

• Code: E315-0035
• Description: Image process device error
  MemFill timeout error
• Remedy: 1. Turn OFF and then ON the main power.
  2. Check connection of Main Controller PCB.
  3. Replace Main Controller PCB (PCB2).

• Code: E315-0100
• Description: Image process device error
  PRIO overrun
• Remedy: 1. Turn OFF and then ON the main power.
  2. Check connection of Main Controller PCB.
  3. Replace Main Controller PCB (PCB2).

• Code: E315-0500
• Description: Device timeout
  An image synchronous signal from the Main Controller PCB to the Reader is not received within 30 seconds.
• Remedy: 1. Turn OFF and then ON the main power.
  2. Check the connection of the Main Controller PCB (including the flat cable).
  3. Replace the flat cable.
  4. Replace the Main Controller PCB (PCB2).