Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 6265i — Trang 27/40

Code: E5F6-8003

Description: Paper Pushing Plate Motor clock error (Finisher-E1)
The number of pulses detected by the Paper Pushing Plate Motor Clock Sensor is 6 pulses or less.
Remedy: 1. The Paper Pushing Plate Home Position Sensor (PI14), Paper Pushing Plate Top Position Sensor (PI15), and Paper Pushing Plate Motor Clock Sensor (PI1) is faulty. 2. The paper pushing plate drive mechanism is faulty. 3. The Paper Pushing Plate Motor (M8) is faulty. 4. The Saddle Stitcher Controller PCB is faulty.

Code: E5F6-8004

Description: Pushing position error (Finisher-E1)
The Paper Pushing Plate Leading Edge Position Sensor does not turn ON when the Paper Pushing Plate Motor has been driven for 0.1 sec.
Remedy: 1. The Paper Pushing Plate Home Position Sensor (PI14), Paper Pushing Plate Top Position Sensor (PI15), and Paper Pushing Plate Motor Clock Sensor (PI1) is faulty. 2. The paper pushing plate drive mechanism is faulty. 3. The Paper Pushing Plate Motor (M8) is faulty. 4. The Saddle Stitcher Controller PCB is faulty.

Code: E5F6-8005

Description: Pushing position error (Finisher-E1)
The Paper Pushing Plate Leading Edge Position Sensor does not turn OFF when the Paper Pushing Plate Motor has been driven for 0.5 sec.
Remedy: 1. The Paper Pushing Plate Home Position Sensor (PI14), Paper Pushing Plate Top Position Sensor (PI15), and Paper Pushing Plate Motor Clock Sensor (PI1) is faulty. 2. The paper pushing plate drive mechanism is faulty. 3. The Paper Pushing Plate Motor (M8) is faulty. 4. The Saddle Stitcher Controller PCB is faulty.

Code: E602

Description: Hard disk error
Remedy: See Service manual

Code: E604-1024

Description: Insufficient memory
Insufficient memory (require 1024 MB).
Remedy: DDR2-SDRAM

Code: E609-0008

Description: Hard disk error
Temperature of the HDD does not rise to the specified temperature within the specified period of time at the time of startup.
Remedy: HDD.

Code: E609-0009

Description: Hard disk error
At the time of recovery from sleep, it does not reach to the specified temperature.
Remedy: HDD.

Code: E610-0001

Description: Failure of the HDD encryption key (hardware configuration error/initialization error/encryption key error/encryption processing error)
The Encryption Board does not exist.
Remedy: Check the hardware configuration.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie