Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 8085 Pro — Trang 23/54

Code: E505-0005

Description: Paper Folding Unit backup RAM error (Paper Folding Unit-H1/Finisher-D1). The value written in EEPROM and the value extracted from EEPROM doesn't conform.
Remedy: The Paper Folding Unit Controller PCB is faulty.

Code: E514-8001

Description: Error in the Gripper Base Motor (Finisher-D1). The gripper does not come off the Gripper Base Rear Sensor when the Gripper Base Motor has been driven for 3 seconds.
Remedy: 1. The connector of the Gripper Base Rear Sensor (S117) or the Gripper Base Motor (M116) are disconnected. 2. The wiring of the Gripper Base Rear Sensor (S117) or the Gripper Base Motor (M116) are faulty. 3. The Gripper Base Rear Sensor (S117) is faulty. 4. The Gripper Base Motor (M116) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E514-8002

Description: Error in the Gripper Base Motor (Finisher-D1). The Gripper Base Rear Sensor dose not detect the gripper when the Gripper Base Motor has been driven for 3 seconds.
Remedy: 1. The connector of the Gripper Base Rear Sensor (S117) or the Gripper Base Motor (M116) are disconnected. 2. The wiring of the Gripper Base Rear Sensor (S117) or the Gripper Base Motor (M116) are faulty. 3. The Gripper Base Rear Sensor (S117) is faulty. 4. The Gripper Base Motor (M116) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E514-8003

Description: Error in the Gripper Motor (Finisher-D1). The gripper does not come off the Gripper HP Sensor when the Gripper Motor has been driven for 3 seconds.
Remedy: 1. The connector of the Gripper HP Sensor (S140) or the Gripper Motor (M117) are disconnected. 2. The wiring of the Gripper HP Sensor (S140) or the Gripper Motor (M117) are faulty. 3. The Gripper HP Sensor (S140) is faulty. 4. The Gripper Motor (M117) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E514-8004

Description: Error in the Gripper Motor (Finisher-D1). The Gripper HP Sensor does not detect the gripper when the Gripper Motor has been driven for 3 seconds.
Remedy: 1. The connector of the Gripper HP Sensor (S140) or the Gripper Motor (M117) are disconnected. 2. The wiring of the Gripper HP Sensor (S140) or the Gripper Motor (M117) are faulty. 3. The Gripper HP Sensor (S140) is faulty. 4. The Gripper Motor (M117) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E514-8005

Description: Error in the Gripper Motor (Finisher-D1). The gripper does not come off the Position Sensor when the Gripper Motor has been driven for 3 seconds.
Remedy: 1. The connector of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are disconnected. 2. The wiring of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are faulty. 3. The Gripper Position Sensor (S115) is faulty. 4. The Gripper Motor (M117) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E514-8006

Description: Error in the Gripper Motor (Finisher-D1). The Gripper Position Sensor does not detect the gripper when the Gripper Motor has been driven for 3 seconds.
Remedy: 1. The connector of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are disconnected. 2. The wiring of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are faulty. 3. The Gripper Position Sensor (S115) is faulty. 4. The Gripper Motor (M117) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E518-8001

Description: Error in Folding Feed Motor lock (Paper Folding Unit-H1). The lock signal turns on for the specified time from the drive start of Folding Feed Motor.
Remedy: 1. Connector of the Folding Feed Motor (M11) is disconnected. 2. Folding Feed Motor (M11) is faulty.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie