Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 8095 Pro — Trang 51/54

Code: E748-2001

Description: Main Controller PCB access error
Remedy: 1. Remove and then reinstall the DDR2-SDRAM(M0/M1/P). 2. Replace the Main Controller PCB 1/2.

Code: E748-4910

Description: Main Controller PCB 2 error
Remedy: Replace the Main Controller PCB 2.

Code: E748-9000

Description: System error
Remedy: Contact to the sales companies

Code: E753-0001

Description: Download error. Firmware update error
Remedy: Turn OFF and then ON the power.

Code: E753-0001

Description: Download Error. System Software Update Error Error occurs when updating system software of uninstalled options
Remedy: Check the log to find where the download error has been occurred. <FIN_D1> Staple Finisher-D1/Booklet Finisher-D1/Paper Folding Unit-H1/Document Insertion Unit-K1/Inner Booklet Trimmer-A1 <PIU_B1> Professional Puncher Integration Unit-B1 When any of the above system software is displayed, check if the target option has been installed. When the target option has not been installed: Turn OFF and then ON the main power supply to restore (since there is no system software to be updated.). When the target option has been installed: Check if the accessory is correctly installed and if the target system software to be downloaded is for the installed option. Then download the appropriate system software again.

Code: E804-0000

Description: Error in Power Supply Cooling Fan (FM3). Error in the Power Supply Cooling Fan is detected.
Remedy: Connector disconnection, failure of Fan.

Code: E804-0000

Description: Power Supply Cooling Fan 1/2 error. The Fan stop signal is detected for 5 seconds or longer and retry is failed 4 times in a row although the Power Supply Cooling Fan 1 (FM14)/Power Supply Cooling Fan 2 (FM15) is turned ON. The error detection signal cable is shared with the Fans, and it is not detected with which Fan the error occurs.
Remedy: 1. Check the connection of the Connector. 2. Replace the Power Supply Cooling Fan 1 (FM14)/Power Supply Cooling Fan 2 (FM15).

Code: E804-0001

Description: Fixing Power Supply Cooling Fan error. The Fan stop signal is detected for 1.5 seconds or longer and retry is failed 4 times in a row although the Fixing Power Supply Cooling Fan (FM7) is turned ON.
Remedy: 1. Check the connection of the Connector. 2. Replace the Fixing Power Supply Cooling Fan (FM7).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie