• Code: E590-8001
• Description: Error in the Punch Motor (Finisher-D1). 1. During initialization, the Punch HP Sensor does not detect the Puncher when the Punch Motor has been driven for 500msec. after the Puncher has come off the Punch HP Sensor. 2. After initialization, the Punch Motor does not return to home position.
• Remedy: 1. The connector of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are disconnected. 2. The connector of the Punch Motor (M102) is disconnected. 3. The wiring of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are faulty. 4. The wiring of the Punch Motor (M102) is faulty. 5. The Punch HP Sensor (S104) is faulty. 6. The Punch Motor Clock Sensor (S105) is faulty. 7. The Punch Motor (M102) is faulty. 8. The Puncher Driver PCB (PCB1) is faulty. 9. The Finisher Controller PCB is faulty.

• Code: E590-8002
• Description: Error in the Punch Motor (Finisher-D1). 1. The Puncher does not come off the Punch HP Sensor when the Punch Motor has been driven for 200msec. 2. The Puncher does not come off the Punch HP Sensor during initialization.
• Remedy: 1. The connector of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are disconnected. 2. The connector of the Punch Motor (M102) is disconnected. 3. The wiring of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are faulty. 4. The wiring of the Punch Motor (M102) is faulty. 5. The Punch HP Sensor (S104) is faulty. 6. The Punch Motor Clock Sensor (S105) is faulty. 7. The Punch Motor (M102) is faulty. 8. The Puncher Driver PCB (PCB1) is faulty. 9. The Finisher Controller PCB is faulty.

• Code: E590-8003
• Description: Punch Motor clock error (Finisher-D1). The drive pulse of the Punch Motor does not reach 100 pulses when the Punch Motor has been driven for 100 msec. after the Puncher has come off the Punch HP Sensor.
• Remedy: 1. The connector of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are disconnected. 2. The connector of the Punch Motor (M102) is disconnected. 3. The wiring of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are faulty. 4. The wiring of the Punch Motor (M102) is faulty. 5. The Punch HP Sensor (S104) is faulty. 6. The Punch Motor Clock Sensor (S105) is faulty. 7. The Punch Motor (M102) is faulty. 8. The Puncher Driver PCB (PCB1) is faulty. 9. The Finisher Controller PCB is faulty.

• Code: E593-8001
• Description: Error in the Punch Slide Motor (Finisher-D1). The punch unit does not come off the Horizontal Registration HP Sensor when the Punch Slide Motor has been driven for 680 msec.
• Remedy: 1. The connector of the Horizontal Registration HP Sensor (S101) or the Punch Slide Motor (M101) are disconnected. 2. The wiring of the Horizontal Registration HP Sensor (S101) or the Punch Slide Motor (M101) are faulty. 3. The Horizontal Registration HP Sensor (S101) is faulty. 4. The Punch Slide Motor (M101) is faulty. 5. The Puncher Driver PCB (PCB1) is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E593-8002
• Description: Error in the Punch Slide Motor (Finisher-D1). The Horizontal Registration HP Sensor does not detect the punch unit when the Punch Slide Motor has been driven for 3.3 seconds.
• Remedy: 1. The connector of the Horizontal Registration HP Sensor (S101) or the Punch Slide Motor (M101) are disconnected. 2. The wiring of the Horizontal Registration HP Sensor (S101) or the Punch Slide Motor (M101) are faulty. 3. The Horizontal Registration HP Sensor (S101) is faulty. 4. The Punch Slide Motor (M101) is faulty. 5. The Puncher Driver PCB (PCB1) is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5A3-0001
• Description: Error in the Registration Motor (Finisher-D1). The Registration HP Sensor does not turn ON when the Registration Motor has been driven for 2.933 seconds.
• Remedy: 1. The connector of the Registration HP Sensor (S105) or the Registration Motor (M102) are disconnected. 2. The wiring of the Registration HP Sensor (S105) or the Registration Motor (M102) are faulty. 3. The Registration HP Sensor (S105) is faulty. 4. The Registration Motor (M102) is faulty. 5. The Trimmer Controller PCB (PCB1) is faulty.

• Code: E5A3-0002
• Description: Error in the Registration Motor (Finisher-D1). The Registration HP Sensor does not turn OFF when the Registration Motor has been driven for 670 msec.
• Remedy: 1. The connector of the Registration HP Sensor (S105) or the Registration Motor (M102) are disconnected. 2. The wiring of the Registration HP Sensor (S105) or the Registration Motor (M102) are faulty. 3. The Registration HP Sensor (S105) is faulty. 4. The Registration Motor (M102) is faulty. 5. The Trimmer Controller PCB (PCB1) is faulty.

• Code: E5A4-8001
• Description: Error in the Press Motor (Finisher-D1). The Press Motor HP Sensor does not turn ON when the Press Motor has been driven for 926 msec.
• Remedy: 1. The connector of the Press Motor HP Sensor (S106) or the Press Motor (M105) are disconnected. 2. The wiring of the Press Motor HP Sensor (S106) or the Press Motor (M105) are faulty. 3. The Press Motor HP Sensor (S106) is faulty. 4. The Press Motor (M105) is faulty. 5. The Trimmer Controller PCB (PCB1) is faulty.