Description: Making Image Exhaust Fan error. The Fan stop signal is detected for 5 seconds or longer and retry is failed 4 times in a row although the Making Image Exhaust Fan (FM3) is turned ON.
Remedy: 1. Check the connection of the Connector. 2. Replace the Making Image Exhaust Fan (FM3).
Description: Fixing Power Supply error. Detected 290V or higher inlet voltage at power-on.
Remedy: 1. Check the outlet voltage. -> Connect to the correct outlet. 2. Check the connection between the Main Driver PCB (PCB2) and the Fixing Power Supply PCB (PCB10). 3. Replace the Fixing Power Supply PCB (PCB10). 4. Replace the Main Driver PCB (PCB2).
Description: Fixing Power Supply error. Detected 50 V or lower inlet voltage at power-on.
Remedy: 1. Check the outlet voltage. -> Connect to the correct outlet. 2. Check the connection between the Main Driver PCB (PCB2) and the Fixing Power Supply PCB (PCB10). 3. Replace the Fixing Power Supply PCB (PCB10). 4. Replace the Main Driver PCB (PCB2).
Description: Fixing Power Supply error. Inlet current is 1A or lower for 1 second or longer although the maximum voltage is output.
Remedy: 1. Check the clogging of the Fixing Power Supply Cooling Fan (FM7). 2. Check the clogging of the Louver on right side of the host machine (Multi-purpose Tray side). 3. Check the connection of the Fixing Power Supply PCB (PCB10) Output Connector. 4. Replace the Fixing Power Supply PCB (PCB10).
Description: 12V OFF detection when relay is turned ON. Detected OFF with 12V of the Fixing Power Supply output after IH relay is turned ON.
Remedy: 1. Check the conduction of the Fixing Thermal Switch 1/2 (TP1/2). 2. Check the drawer between the Fixing Assembly and the host machine. 3. Check the connection between the Main Driver PCB (PCB2) and the Fixing Power Supply PCB (PCB10). 4. Replace the Fixing Power Supply Unit. 5. Replace the Main Driver PCB (PCB2).
Description: Fixing Power Supply error. Inlet voltage and the IH Power Supply ID are not matched.
Remedy: Check the connection between the Main Driver PCB (PCB2) and the Fixing Power Supply PCB (PCB10). Replace the Fixing Power Supply PCB with the one for the correct location (voltage).
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.