• Code: E247-0003
• Description: System error
• Remedy: Contact to the sales companies.

• Code: E247-0004
• Description: System error
• Remedy: Contact to the sales companies.

• Code: E248-0000
• Description: SRAM error. SRAM check error when the power is turned ON.
• Remedy: Main Controller PCB 2.

• Code: E248-0001
• Description: EEPROM error. An error when EEPROM power for the Reader Controller PCB (PCB1) is turned ON.
• Remedy: Failure of the Reader Controller PCB (PCB1).

• Code: E248-0002
• Description: EEPROM error. EEPROM writing error for the Reader Controller PCB (PCB1).
• Remedy: Failure of the Reader Controller PCB (PCB1).

• Code: E248-0003
• Description: EEPROM error. Reading error after writing to EEPROM for the Reader Controller PCB (PCB1).
• Remedy: Failure of the Reader Controller PCB (PCB1).

• Code: E263-0000
• Description: Error in Current Sensor reference voltage generation. The reference voltage is not within the range of reference value.
• Remedy: 1. Check the connection between the AC Driver PCB and the Main Driver PCB (connector disconnection, open circuit, short circuit of harness). AC Driver side: J615, Main Driver side: J103 2. Replace the AC Driver PCB. 3. Replace the Main Driver PCB (PCB2).

• Code: E263-0001
• Description: Current Sensor error. An error is detected in the value of the Current Sensor (SE601) (the value remains at the upper limit).
• Remedy: 1. Check the connection between the AC Driver PCB and the Main Driver PCB (connector disconnection, open circuit, short circuit of harness). AC Driver side: J615, Main Driver side: J103 2. Replace the AC Driver PCB. 3. Replace the Main Driver PCB (PCB2).