Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C2030i — Trang 23/45

Code: E315-0100

Description: Image process device error
PRIO overrun
Remedy: 1. Turn OFF and then ON the main power 2. Check connection of Main Controller PCB 2 3. Replace Main Controller PCB 2

Code: E315-0500

Description: Device timeout
An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0501

Description: Device abnormal completion
An abnormal signal from the Main Controller PCB 2 to the Reader is detected.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0510

Description: Device timeout
An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0511

Description: Device abnormal completion
An abnormal signal from the Main Controller PCB 2 to the Reader is detected.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0520

Description: Device timeout
An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0521

Description: Device abnormal completion
An abnormal signal from the Main Controller PCB 2 to the Reader is detected.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0530

Description: Device timeout
An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie