Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C5035 — Trang 54/56

Code: E804-0000

Description: Error in Power Supply Fan
Lock of the Power Supply Fan was detected
Remedy: 1. Check power distribution to the Fan. 2. Replace the Fan.

Code: E805-0000

Description: Error in Fixing Heat Exhaust Fan 2
1. After the power of the Host Machine has been turned ON, rotation of the Fixing Heat Exhaust Fan 2 (FM2) was detected before turning ON the fan. 2. There is no rotation signal while the Fixing Heat Exhaust Fan 2 (FM2) is rotating.
Remedy: 1. Check the Fixing Heat Exhaust Fan 2 (FM2) harness (to see if the harness is caught, disconnected or physically removed). 2. Check the fuse of the Pickup Feed Driver PCB (UN2). 3. Replace the Pickup Feed Driver PCB (UN2). 4. Replace the Fixing Heat Exhaust Fan 2 (FM2).

Code: E805-0001

Description: Error in Fixing Heat Exhaust Fan 1
Remedy: 1. After the power of the Host Machine has been turned ON, rotation of the Fixing Heat Exhaust Fan 1 (FM1) was detected before turning ON the fan. 2. There is no rotation signal while the Fixing Heat Exhaust Fan 1 (FM1) is rotating.

Code: E806-0000

Description: Error in Delivery fan 1
1. Failure in the Connect signal when the fan was turned OFF. 2. Failure detected while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Pickup Feed Driver PCB (UN2). 3. Replace the Delivery Fan (FM7).

Code: E806-0001

Description: Error in Delivery fan 2
1. After the power of the Host Machine has been turned ON, rotation of the fan was detected before turning ON the fan. 2. There is no rotation signal while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Pickup Feed Driver PCB (UN2). 3. Replace the Delivery Fan 2 (FM9).

Code: E806-0002

Description: Error in Secondary Transfer Exhaust Fan
1. After the power of the Host Machine has been turned ON, rotation of the fan was detected before turning ON the fan. 2. There is no rotation signal while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Pickup Feed Driver PCB (UN2). 3. Replace the Secondary Transfer Exhaust Fan (FM8).

Code: E807-0000

Description: Error in Process cartridge fan (rear)
1. After the power of the Host Machine has been turned ON, rotation of the fan was detected before turning ON the fan. 2. There is no rotation signal while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Relay Board. 3. Replace the fan.

Code: E807-0001

Description: Error in Process cartridge fan (front)
1. After the power of the Host Machine has been turned ON, rotation of the fan was detected before turning ON the fan. 2. There is no rotation signal while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Pickup Feed Driver PCB (UN2). 3. Replace the fan.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie