Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C5035 — Trang 56/56

Code: E890-0000

Description: Environment Sensor 1 error
A communication error between the Environment Sensor 1 and DC Controller PCB was detected.
Remedy: 1. Disconnect and then connect the connector of the Environment Sensor 1 (UN22). 2. Disconnect and then connect the connector (J104) on the DC Controller PCB. 3. Replace the Environment Sensor 1 (UN22). 4. Replace the DC Controller PCB.

Code: E890-0001

Description: Environment Sensor 2 error
The Environment Sensor 2 detected the value higher than the specified value.
Remedy: 1. Disconnect and then connect the connector of the Environment Sensor 2 (UN50). 2. Disconnect and then connect the connector (J104) on the DC Controller PCB. 3. Check if the cable of the Environment Sensor 2 (UN50) is open circuit. 4. Replace the Environment Sensor 2 (UN50). 5. Replace the DC Controller PCB.

Code: E890-0002

Description: Environment Sensor 2 error
The Environment Sensor 2 detected the value lower than the specified value
Remedy: 1. Disconnect and then connect the connector of the Environment Sensor 2 (UN50). 2. Disconnect and then connect the connector (J104) on the DC Controller PCB. 3. Check if the cable of the Environment Sensor 2 (UN50) is open circuit. 4. Replace the Environment Sensor 2 (UN50). 5. Replace the DC Controller PCB.

Code: E996-0071

Description: Frequent error avoidance jam (ADF)
Remedy: Depending on the setting of JM-ERR-R in service mode, 010071 jam is displayed as an error. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNCSW> JM-ERR-R, and set JM-ERR-R to 0.

Code: E996-0CA1

Description: Frequent error avoidance jam (PRINTER)
Remedy: Make 000CA1 jam to be displayed as an error by setting JM-ERR-D in service mode. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNCSW> JM-ERR-D, and set JM-ERR-D to 0.

Code: E996-0CA2

Description: Frequent error avoidance jam (PRINTER)
Error avoidance jam (PRINTER)
Remedy: Make 000CA2 jam to be displayed as an error by setting JM-ERR-D in service mode. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNCSW> JM-ERR-D, and set JM-ERR-D to 0.

Code: E996-0CA3

Description: Frequent error avoidance jam (PRINTER)
Remedy: Make 000CA3 jam to be displayed as an error by setting JM-ERR-D in service mode. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNCSW> JM-ERR-D, and set JM-ERR-D to 0.

Code: E996-0CAF

Description: Frequent error avoidance jam (PRINTER)
Remedy: Make 000CAF jam to be displayed as an error by setting JM-ERR-D in service mode. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNCSW> JM-ERR-D, and set JM-ERR-D to 0.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie