Code :

Code: E744-0001
Description: Failure in language file
Mismatched version between the HDD and the Bootable
Remedy: Reinstall the correct language file using SST or USB memory reinstall the entire software.

Code: E744-0002
Description: Failure in language file
Oversized language file in HDD
Remedy: Format the HDD and reinstall the software because there can be more than necessary language files.

Code: E744-0003
Description: Failure in language file
Unable to find the language which should be switched and described in Config.txt in the HDD.
Remedy: Reinstall the software.

Code: E744-0004
Description: Failure in language file
Unable to switch to the language in the HDD.
Remedy: Reinstall the software.

Code: E744-2000
Description: Controller firmware mismatch
Invalid controller firmware was detected.
Remedy: This error normally does not occur. This error occurs when using the HDD which was used with another model. Replace the HDD with the one which was originally installed or a new one for the model.

Code: E744-4000
Description: Model information mismatch
Mismatch of model information between the Main Controller PCB 1 and the DC Controller is detected.
Remedy: This error occurs only when replacing the DC Controller. By returning the original PCB, this error can be recovered. (If other error code is displayed, see the corresponding error code.) If it is not recovered, replace the DC Controller to a new one. DC Controller PCB does not have model information at the time of shipment. Model information is written when installing the PCB to the host machine. Therefore, the DC Controller PCB which was installed to imageRUNNER ADVANCE C5250 can be installed only to imageRUNNER ADVANCE C5250.