Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C5550i — Trang 47/72

Code: 733-0F02-05

Description: Printer communication error
Causes: Communication error that can be recovered by reboot If it is detected again immediately after reboot, E733-0002 is generated.
Remedy: It is not necessary to perform a remedy because the machine is automatically rebooted after log collection.

Code: 733-9999-05

Description: Printer communication error
Causes: The Finisher connection information error was detected between the DC Controller PCB and the Main Controller PCB.
Remedy: Turn OFF and then ON the power

Code: 743-0000-04

Description: Communication error
Causes: The Reader Controller PCB detected a communication error between the Main Controller PCB and the Reader Controller PCB.
Remedy: [Related parts] R1.00 - Harness between the Reader Controller PCB (UN_BO1/J109) and the Riser PCB (J7) - Reader Controller PCB (UN_BO1) - Riser PCB - Main Controller PCB [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 743-0001-04

Description: DDI communication error
Causes: Software sequence error
Remedy: Turn OFF and then ON the main power.

Code: 744-0001-00

Description: Language file error
Causes: The language file in HDD was not supported by the version of Bootable.
Remedy: Reinstall the correct language file using SST or USB memory reinstall the entire software.

Code: 744-0002-00

Description: Language file error
Causes: Size of the language file in HDD was too big.
Remedy: Reinstall the correct language file using SST or USB memory reinstall the entire software.

Code: 744-0003-00

Description: Language file error
Causes: The language file to be switched to that was described in the Config.txt in HDD was not found.
Remedy: Reinstall the correct language file using SST or USB memory reinstall the entire software.

Code: 744-0004-00

Description: Language file error
Causes: Switching to the language file in the HDD failed.
Remedy: Reinstall the correct language file using SST or USB memory reinstall the entire software.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie