Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7270 — Trang 65/75

Code: E732-8888

Description: Error in the reader type. When a scanner for the different model is detected during the communication with the reader.
Remedy: Replace to the proper reader.

Code: E732-9999

Description: The Reader detection.
Remedy: In case of first detection of the reader on printer model (‘Please power cycle’ message is only displayed on the user screen instead of an error code. Service mode> DISPLAY> ERR is recorded in error log.)

Code: E733-0001

Description: Printer communication is abnormal. Failure of communication between the controller and DC controller
Remedy: 1. Connected connector check with the printer 2. The power supply check (check if initialization is executed in startup) of the printer 3. Replacement of DC controller or main controller board

Code: E733-0002

Description: Printer communication error. An error occurred to detect printer vertical synchronous signal.
Remedy: 1. Check the connection to the printer. ?¨ Connect the connector/replace the harness. 2. Check the power of the printer (check if the initialization operation is executed at startup). 3. Replace the DC Controller PCB/Main Controller PCB.

Code: E733-0010

Description: Printer communication is abnormal. Printer vertical synchronizing signal detection failure
Remedy: 1. Connected connector check with the printer 2. The power supply check (check if initialization is executed in startup) of the printer 3. Replacement of DC controller or main controller board

Code: E733-0020

Description: Printer communication is abnormal. Communication error
Remedy: 1. Connected connector check with the printer 2. The power supply check (check if initialization is executed in startup) of the printer 3. Replacement of DC controller or main controller board

Code: E733-0021

Description: Printer communication is abnormal. Communication error
Remedy: 1. Connected connector check with the printer 2. The power supply check (check if initialization is executed in startup) of the printer 3. Replacement of DC controller or main controller b

Code: E743-0000

Description: DDI communication error. The reader controller PCB detected a failure in communication between the main controller PCB and the reader controller PCB.
Remedy: 1. Failure of the connection between the main controller PCB and the reader controller PCB 2. Failure of the reader controller PCB (PCB1) 3. Failure of the main controller PCB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie