Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7565i — Trang 18/112

Code: 056-0001-05

Description: Reverse Roller disengagement home position error
Causes: The Reverse Roller Detachment HP Sensor did not detect home position despite an operation of the Reverse Disengagement Motor in the Reverse Delivery Unit at initialization.
Remedy: [Related parts] R1.00 - Harness between the Pickup Feed Driver PCB (UN4/J1405) and the Reverse Disengagement Motor (M54/J7030) - Harness between the Pickup Feed Driver PCB (UN4/J1494) and the Reverse Roller Detachment HP Sensor (PS101/J7008) - Reverse Disengagement Motor (M54) - Reverse Roller Detachment HP Sensor (PS101) - Pickup Feed Driver PCB (UN4) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 056-0002-05

Description: Reverse Roller disengagement home position error
Causes: The Reverse Roller Detachment HP Sensor did not detect change in home position despite an operation of the Reverse Disengagement Motor in the Reverse Delivery Unit during printing.
Remedy: [Related parts] R1.00 - Harness between the Pickup Feed Driver PCB (UN4/J1405) and the Reverse Disengagement Motor (M54/J7030) - Harness between the Pickup Feed Driver PCB (UN4/J1494) and the Reverse Roller Detachment HP Sensor (PS101/J7008) - Reverse Disengagement Motor (M54) - Reverse Roller Detachment HP Sensor (PS101) - Pickup Feed Driver PCB (UN4) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 060-0001-05

Description: Primary Charging Wire Shutter HP error
Causes: The Primary Wire HP Sensor detected the open status although the shutter of the Primary Charging Assembly was moved to the close position.
Remedy: [Related parts] R1.00 - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1357) and the Primary Charging Wire Cleaning Motor (M1/J7147) - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1357) and the Primary Wire HP Sensor (PS92/J8521) - Primary Charging Wire Cleaning Motor (M1) - Primary Wire HP Sensor (PS92) - Primary Charging Assembly - Multi-purpose Tray Pickup Driver PCB (UN97) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 060-0002-05

Description: Primary Charging Wire Shutter HP error
Causes: The Primary Wire HP Sensor detected the close status although the shutter of the Primary Charging Assembly was moved to the open position.
Remedy: [Related parts] R1.00 - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1357) and the Primary Charging Wire Cleaning Motor (M1/J7147) - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1357) and the Primary Wire HP Sensor (PS92/J8521) - Primary Charging Wire Cleaning Motor (M1) - Primary Wire HP Sensor (PS92) - Primary Charging Assembly - Multi-purpose Tray Pickup Driver PCB (UN97) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 060-0011-05

Description: Primary Charging Wire Shutter HP error
Causes: The home position was not detected although 10 sec had passed since the start of shutter operation of the Primary Charging Assembly.
Remedy: [Related parts] R1.00 - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1357) and the Primary Wire HP Sensor (PS92/J8521) - Primary Wire HP Sensor (PS92) - Primary Charging Assembly - Multi-purpose Tray Pickup Driver PCB (UN97) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 060-0012-05

Description: Primary Charging Wire Shutter HP error
Causes: Change in home position was not detected although 10 sec had passed since the start of shutter operation of the Primary Charging Assembly.
Remedy: [Related parts] R1.00 - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1357) and the Primary Wire HP Sensor (PS92/J8521) - Primary Wire HP Sensor (PS92) - Primary Charging Assembly - Multi-purpose Tray Pickup Driver PCB (UN97) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 060-0023-05

Description: Primary Charging Wire Shutter HP error
Causes: Home position error of the Primary Charging Assembly Shutter was detected during rotation of the Bk Drum.
Remedy: [Related parts] R1.00 - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1357) and the Primary Charging Wire Cleaning Motor (M1/J7147) - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1357) and the Primary Wire HP Sensor (PS92/J8521) - Primary Charging Wire Cleaning Motor (M1) - Primary Wire HP Sensor (PS92) - Primary Charging Assembly - Multi-purpose Tray Pickup Driver PCB (UN97) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 061-0001-05

Description: Primary charging dark area potential error
Causes: It was detected that the drum surface potential Vd at potential control during initial rotation was 500 V or higher or 1050 V or lower.
Remedy: [Related parts] R1.00 - Harnesses connecting the Relay PCB (UN7/J1816), the Primary Charging High Voltage PCB (CL) (UN38/J3021) and the Primary Charging High Voltage PCB (Bk) (UN37/J3011) - Harness between the DC Controller PCB (UN2/J1253) and the Primary Charging High Voltage PCB (CL) (UN38/J3040) - Harness between the Primary Charging High Voltage PCB (CL) (UN38/J3050) and the Primary Charging High Voltage PCB (Bk) (UN37/J3010) - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1355) and the Potential Control PCB (UN29/J3530) - Harness between the Potential Control PCB (UN29/J3531) and the Potential Sensor (UN160/ J8073) - Harness between the Drum Driver PCB (UN6/J1907) and the Drum Motor (Bk) (M19/J7306) - Harness between the Laser Interface PCB (UN106/J76) and the Laser Scanner Unit (Bk) (J8064) - Primary Charging High Voltage PCB (Bk) (UN37) - Primary Charging High Voltage PCB (CL) (UN38) - Primary Charging Assembly - Drum Motor (Bk) (M19) - Potential Sensor (UN160) - Potential Control PCB (UN29) - Relay PCB (UN7) - Multi-purpose Tray Pickup Driver PCB (UN97) - Drum Driver PCB (UN6) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] - After replacement of the Potential Control PCB Unit, execute offset adjustment of the Potential Sensor by referring to "Parts Replacement and Cleaning Procedure> Image Formation System> Potential Sensor> When Replacing the Potential Control PCB" in the Service Manual. - Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie