Causes: It was detected that the output value of the developing DC bias (Y) was out of the specified range.
Remedy: [Related parts] R1.00 - Cable between the Developing High Voltage PCB (CL) (UN40/J3042) and the Resistance PCB (UN56) - Resistance PCB (UN56) - Developing High Voltage PCB (CL) (UN40) [Remedy] Check/replace the related harness/cable, connector and parts.
Description: Primary charging AC bias (M) high voltage output error
Causes: It was detected that the output value of the primary charging AC bias (M) was out of the specified range.
Remedy: [Related parts] R1.00 - Cable between the Primary Charging High Voltage PCB (CL) (UN38/J3322) and the Resistance PCB (UN60) - Resistance PCB (UN60) - Primary Charging High Voltage PCB (CL) (UN38) [Remedy] Check/replace the related harness/cable, connector and parts.
Description: Primary charging AC (M) high voltage output error
Causes: It was detected that the output value of the primary charging AC (M) was out of the specified range at open detection.
Remedy: [Related parts] R1.00 - Cable between the Primary Charging High Voltage PCB (CL) (UN38/J3322) and the Resistance PCB (UN60) - Resistance PCB (UN60) - Primary Charging High Voltage PCB (CL) (UN38) [Remedy] Check/replace the related harness/cable, connector and parts.
Causes: It was detected that the output value of the developing DC bias (M) was out of the specified range.
Remedy: [Related parts] R1.00 - Cable between the Developing High Voltage PCB (CL) (UN40/J3342) and the Resistance PCB (UN57) - Resistance PCB (UN57) - Developing High Voltage PCB (CL) (UN40) [Remedy] Check/replace the related harness/cable, connector and parts.
Description: Primary charging AC bias (C) high voltage output error
Causes: It was detected that the output value of the primary charging AC bias (C) was out of the specified range.
Remedy: [Related parts] R1.00 - Cable between the Primary Charging High Voltage PCB (CL) (UN38/J3522) and the Resistance PCB (UN61) - Resistance PCB (UN61) - Primary Charging High Voltage PCB (CL) (UN38) [Remedy] Check/replace the related harness/cable, connector and parts.
Description: Primary charging AC (C) high voltage output error
Causes: It was detected that the output value of the primary charging AC (C) was out of the specified range at open detection.
Remedy: [Related parts] R1.00 - Cable between the Primary Charging High Voltage PCB (CL) (UN38/J3522) and the Resistance PCB (UN61) - Resistance PCB (UN61) - Primary Charging High Voltage PCB (CL) (UN38) [Remedy] Check/replace the related harness/cable, connector and parts.
Causes: It was detected that the output value of the developing DC bias (C) was out of the specified range.
Remedy: [Related parts] R1.00 - Cable between the Developing High Voltage PCB (CL) (UN40/J3542) and the Resistance PCB (UN58) - Resistance PCB (UN58) - Developing High Voltage PCB (CL) (UN40) [Remedy] Check/replace the related harness/cable, connector and parts.
Causes: It was detected that the output value of the developing DC bias (Bk) was out of the specified range.
Remedy: [Related parts] R1.00 - Cable between the Developing High Voltage PCB (Bk) (UN39/J3044) and the Resistance PCB (UN55) - Resistance PCB (UN55) - Developing High Voltage PCB (Bk) (UN39) [Remedy] Check/replace the related harness/cable, connector and parts.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.