• Code: 262-1310-05
• Description: Power supply error
• Causes: The 24 V supply to the Developing Assembly Control PCB was not detected.
• Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1201) and the Developing Assembly Control PCB (UN96/J1300) - Developing Assembly Control PCB (UN96) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

• Code: 262-1400-05
• Description: Power supply error
• Causes: The 24 V supply to the DC Controller PCB was not detected.
• Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1200) and the Relay PCB (UN7/J1817) - Relay PCB (UN7) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

• Code: 262-1410-05
• Description: Power supply error
• Causes: The 24 V supply to the Developing Assembly Control PCB was not detected.
• Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1252) and the Developing Assembly Control PCB (UN96/J1308) - Developing Assembly Control PCB (UN96) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

• Code: 262-2000-05
• Description: Power supply error
• Causes: The 24 V supply to the Relay PCB was not detected.
• Remedy: [Related parts] R1.00 - Harness between the Relay PCB (UN7/J1803) and the DC Power Supply PCB (24VB) (UN35/ J2020) - Harness between the AC Driver PCB (UN8/J810 and J813) and the DC Power Supply PCB (24VB) (UN35/J1020) - Harness between the Relay PCB (UN7/J1821) and the Pickup Feed Driver PCB (UN4/J1480) - Harness between the Pickup Feed Driver PCB (UN4/J1490) and the AC Driver PCB (UN8/J811) - DC Power Supply PCB (24VB) (UN35) - Relay PCB (UN7) - Pickup Feed Driver PCB (UN4) - AC Driver PCB (UN8) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 262-2100-05
• Description: Power supply error
• Causes: The 24 V supply to the Pickup Feed Driver PCB was not detected.
• Remedy: [Related parts] R1.00 - Harness between the Relay PCB (UN7/J1821) and the Pickup Feed Driver PCB (UN4/J1480) - Pickup Feed Driver PCB (UN4) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 262-2200-05
• Description: Power supply error
• Causes: The 24 V supply to the Buffer Driver PCB was not detected.
• Remedy: [Related parts] R1.00 - Harness between the Relay PCB (UN7/J1806) and the Buffer Driver PCB (UN98/J2100) - Buffer Driver PCB (UN98) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 262-2210-05
• Description: Power supply error
• Causes: The 24 V supply to the Decurler Motor was not detected.
• Remedy: [Related parts] R1.00 - Harness between the Buffer Driver PCB (UN98/J2107) and the Decurler Feeding Motor (M51/ J7510) - Decurler Feeding Motor (M51) - Decurler Advancement Adjusting Motor (M53) - Buffer Driver PCB (UN98) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 262-2300-05
• Description: Power supply error
• Causes: The 24 V supply to the Pickup Feed Driver PCB was not detected.
• Remedy: [Related parts] R1.00 - Harness between the Relay PCB (UN7/J1821) and the Pickup Feed Driver PCB (UN4/J1480) - Pickup Feed Driver PCB (UN4) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts.