Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7570i — Trang 41/112

Code: 263-1800-05

Description: Power supply error
Causes: The 3.3 V supply to the Laser Interface PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1259) and the Laser Interface PCB (UN106/J15) - DC Controller PCB (UN2) - Laser Interface PCB (UN106) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 263-1900-05

Description: Power supply error
Causes: The 5 V supply to the Laser Interface PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1259) and the Laser Interface PCB (UN106/J15) - Laser Interface PCB (UN106) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 263-1A00-05

Description: Power supply error
Causes: The 12 V supply to the DC Controller PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1200) and the Relay PCB (UN7/J1817) - Relay PCB (UN7) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 263-1A10-05

Description: Power supply error
Causes: The 5 V supply to the Laser Interface PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1259) and the Laser Interface PCB (UN106/J15) - Laser Interface PCB (UN106) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 264-1000-05

Description: Power supply error
Causes: The 5 V supply to the DC Controller PCB and Multi-purpose Tray Paper Sensor were not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1258) and the Riser PCB (UN159/J8518) - Harness between the DC Controller PCB (UN2/J1225) and the Drum Driver PCB (UN6/J1901) - Harness between the Drum Driver PCB (UN6/J1902) and the Multi-purpose Tray Pickup Driver PCB (UN97/J1351) - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1359) and the Multi-purpose Tray Paper Sensor (PS37/J8539) - Multi-purpose Tray Paper Sensor (PS37) - Multi-purpose Tray Pickup Driver PCB (UN97) - Drum Driver PCB (UN6) - Riser PCB (UN159) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 264-2000-05

Description: Power supply error
Causes: The 3.3 V output from the DC Controller PCB was not detected.
Remedy: Check/replace the DC Controller PCB (UN2). [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 280-0001-04

Description: Communication error
Causes: Communication between the Reader Controller PCB and the Reader Scanner Unit was not completed within the specified period of time.
Remedy: [Related parts] R1.00 - Harness between the Reader Scanner Unit (UN2/J1101) and the Reader Controller PCB (UN1/ J106) - Harness between the Reader Controller PCB (UN1/J109) and the Riser PCB (UN159/J7) - Reader Scanner Unit (UN2) - Reader Controller PCB (UN1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 280-0002-04

Description: Communication error
Causes: Disconnection of FFC between the Reader Controller PCB and the Reader Scanner Unit was detected.
Remedy: Check/replace the harness between the Reader Scanner Unit (UN2/J1101) and the Reader Controller PCB (UN1/J106).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie