Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7570i — Trang 104/112

Code: 747-FF00-00

Description: Board error
Causes: There was unexpected interruption from ASIC.
Remedy: [Related parts] R1.00 - Harness betweens the Reader Controller PCB (UN_BO1/J109) and the Riser PCB (J7) - Bypass PCB (when non-Canon-made controller is installed) - Open I/F PCB (when non-Canon-made controller is installed) - Riser PCB - Main Controller PCB - HDD [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 747-FF01-00

Description: Board error
Causes: There was unexpected interruption from ASIC.
Remedy: [Related parts] R1.00 - Harness betweens the Reader Controller PCB (UN_BO1/J109) and the Riser PCB (J7) - Bypass PCB (when non-Canon-made controller is installed) - Open I/F PCB (when non-Canon-made controller is installed) - Riser PCB - Main Controller PCB - HDD [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 748-2000-00

Description: Main Controller PCB access error
Causes: Main Controller PCB Chip access error.
Remedy: Check/replace the Main Controller PCB (UN158)

Code: 748-2001-00

Description: Main Controller PCB access error
Causes: Main Controller PCB memory access error.
Remedy: Check/replace the Main Controller PCB (UN158)

Code: 748-2010-00

Description: Flash PCB error / HDD error
Causes: IPL (startup program) was not found, or the HDD could not be recognized.
Remedy: [Related parts] R1.00 - Harnesses between the Main Controller PCB (UN158/J2000 and J2010) and the HDD - HDD - Flash PCB (UN157) - Main Controller PCB (UN158) [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Disconnect the cable between the Main Controller PCB and the HDD, and turn ON the main power. a. When the error code has not been changed: 1. Obtain the necessary backup data by referring to the backup data list. 2. Enter safe mode using (2+8) startup, and execute [4] Clear/Format> [2] Flash Format (Flash format) using a USB memory. 3. After replacing the Flash PCB, reinstall the system software using SST or a USB memory. 4. Restore the backup data. b. When the error code has been changed to another one, see the remedy for the corresponding code. [Reference] For backup and restoration, refer to "Adjustment> Main Controller System" and "Appendix> Backup Data List" in the Service Manual.

Code: 748-2011-00

Description: Flash PCB error
Causes: OS was not found at startup.
Remedy: After replacing the Flash PCB (UN157), reinstall the system software using SST or a USB memory.

Code: 748-2012-00

Description: Flash PCB error
Causes: Cannot mount the OS in safe mode startup or No OS startup script
Remedy: After replacing the Flash PCB (UN157), reinstall the system software using SST or a USB memory.

Code: 748-2021-00

Description: Main Controller PCB access error
Causes: Main controller board access errors
Remedy: Check/replace the Main Controller PCB (UN158)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie