Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7570i — Trang 106/112

Code: 750-0002-05

Description: System software error
Causes: Combination of the DC Controller software and the Toner Container CPU software was not correct.
Remedy: Reinstall the system software using SST or a USB memory.

Code: 750-0003-05

Description: System software error
Causes: Model information of the DC Controller did not match the notification from the controller.
Remedy: Reinstall the system software using SST or a USB memory.

Code: 753-0001-00

Description: Download Error
Causes: Update of the system software failed.
Remedy: Perform the following in the order while checking whether the error is cleared. 1. Turn OFF and then ON the main power. 2. Reinstall the system software using SST or a USB memory. 3. Replace the FLASH PCB, and reinstall the system software. 4. Collect debug log and contact the sales company.

Code: 760-0001-00

Description: Main Controller PCB internal error
Causes: An error was detected in the Main Controller PCB.
Remedy: Check/replace the Main Controller PCB (UN158)

Code: 804-0000-00

Description: Power Supply Cooling Fan error
Causes: It was detected that the Power Supply Cooling Fan was locked.
Remedy: [Related parts] R1.00 - Harness connecting from the Relay PCB (UN7/J412) to the Power Supply Fan 1 and Power Supply Fan 2 (FM8/J7401 and FM9/J7400) - Power Supply Fan 1 and 2 (FM8 and FM9) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 804-0001-05

Description: Pre-fixing Feed Attraction Fan error
Causes: It was detected that the Pre-fixing Feed Attraction Fan was locked.
Remedy: [Related parts] R1.00 - Harness between the Drum Driver PCB (UN6/J1908) and the Pre-fixing Feed Attraction Fan (FM1/J7159) - Pre-fixing Feed Attraction Fan (FM1) - Drum Driver PCB (UN6) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 804-0002-05

Description: Primary Charging Suction Fan error
Causes: It was detected that the Primary Charging Suction Fan was locked.
Remedy: [Related parts] R1.00 - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1356) and the Primary Charging Suction Fan (FM2/J7109) - Primary Charging Suction Fan (FM2) - Multi-purpose Tray Pickup Driver PCB (UN97) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 804-0003-05

Description: Primary Charging Exhaust Fan error
Causes: It was detected that the Primary Charging Exhaust Fan was locked.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1249) and the Primary Charging Exhaust Fan (FM3/J7111) - Primary Charging Exhaust Fan (FM3) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie