Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR2230 — Trang 6/24

Code: E315-0007

Description: There is an error in image data.
There is an error in JBIG encoding.
Remedy: Turn off and then back on the power.

Code: E315-000d

Description: There is an error in image data.
There is an error in JBIG decoding.
Remedy: Turn off and then back on the power.

Code: E400-0001

Description: DF communication error
Check sum error
Remedy: Disconnect and then connect the connector. Replace the reader controller PCB. Replace the ADF controller PCB.

Code: E400-0002

Description: DF communication error
Reception status error
Remedy: Disconnect and then connect the connector. Replace the reader control PCB. Replace the ADF control PCB.

Code: E400-0003

Description: DF communication error
Reception interrupt error
Remedy: Disconnect and then connect the connector. Replace the reader controlled PCB. Replace the ADF controller PCB.

Code: E490-0001

Description: Wrong DF
The installed DF is not of a supported type.
Remedy: Install an ADF that is compatible with the machine.

Code: E500-0001

Description: Finisher communication error
Data communication could not be performed normally. It has been retried three times in vain.
Remedy: Replace the finisher controller PCB. Replace the DC controller PCB.

Code: E503-0001

Description: fault in communicatio n with the finisher (Finisher-Q3/ Q4)
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie