Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR2230 — Trang 9/24

Code: E531-8001

Description: Stapler error (Finisher-S1)
At time of staple jam recovery, the home position sensor does not go on with 500 msec after the start of reverse rotation of the stapler motor
Remedy: Replace the finisher controller PCB. Replace the stapler. Check the harness.

Code: E531-8002

Description: Stapler error (Finisher-S1)
The home position sensor does not go off within 500 msec after the stapler motor has been started.
Remedy: Replace the finisher controller PCB. Replace the stapler. Check the harness.

Code: E532-0001

Description: Stapler shift error (Finisher-Q3/ Q4)
The home position sensor does not go off even after the stapler shift motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the stapler shift motor. Check the stapler shift home position sensor. Check the harness.

Code: E532-0002

Description: Stapler shift error (Finisher-Q3/ Q4)
The home position sensor does not go on even when the stapler shift motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the stapler shift motor. Check the stapler shift home position sensor. Check the harness.

Code: E532-8001

Description: Stapler shift error (Finisher-S1)
The stapler slide home position sensor does not go on within 11 sec when the stapler is shifted to home position.
Remedy: Replace the finisher controller PCB. Replace the stapler shift motor. Check the stapler shift home position sensor. Check the harness.

Code: E532-8002

Description: Stapler shift error (Finisher-S1)
The stapler slide home position sensor does not go off within 1.0 sec when the stapler is shifted from home position.
Remedy: Replace the finisher controller PCB. Replace the stapler shift motor. Check the stapler shift home position sensor. Check the harness.

Code: E535-0001

Description: Swing cam error (Finisher-S1)
The home position sensor does not go off within 1000 msec after the start of operation when the swing arm is shifted from home position.
Remedy: Replace the finisher controller PCB. Replace the swing cam motor. Check the swing cam home position sensor. Check the harness.

Code: E535-0001

Description: Swing cam error (Finisher-Q3/ Q4)
The home position sensor does not go off even when the swing motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the swing cam motor. Check the swing cam home position sensor. Check the harness.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie