Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR2525 — Trang 6/9

Code: E532-0001

Description: STP Move Motor (M1) error
The stapler does not leave the stapler move home position when the STP Move Motor (M1) has been driven for 0.25 sec.
Remedy: 1.Replace the Stapler Move HP Sensor (S10). 2.Check the wiring between the Finisher Controller PCB and the STP Move Motor. 3.Check the stapler shift base. 4.Replace the STP Move Motor (M1). 5.Replace the Finisher Controller PCB (PCB1).

Code: E532-0002

Description: STP Move Motor (M1) error
The stapler does not return to the stapler move home position when the STP Move Motor (M1) has been driven for 2.8 sec.
Remedy: 1.Replace the Stapler Move HP Sensor (S10). 2.Check the wiring between the Finisher Controller PCB and the STP Move Motor. 3.Check the stapler shift base. 4.Replace the STP Move Motor (M1). 5.Replace the Finisher Controller PCB (PCB1).

Code: E540-0001

Description: Tray Lift Motor (M11) time out error
The stack tray does not move within a specified time period.
Remedy: 1.Replace the Tray Lift Motor (M11). 2.Replace the Finisher Controller PCB (PCB1).

Code: E540-0005

Description: Tray Lift Motor (M11) closing detect switch error
The FG input cannot be detected when the Tray Lift Motor (M11) has been driven for 0.1 second.
Remedy: 1.Replace the Stack Tray Clock Sensor (S13). 2.Replace the Tray Lift Motor (M11). 3.Replace the Finisher Controller PCB (PCB1).

Code: E542-0001

Description: Additional Tray Lift Motor (M12) time out error
The stack tray does not move within a specified time period.
Remedy: 1.Replace the Additional Tray Lift Motor (M12). 2.Replace the Finisher Controller PCB (PCB1).

Code: E542-0005

Description: Additional Tray Lift Motor (M12) closing detect switch error
The FG input cannot be detected when the Additional Tray Lift Motor (M12) has been driven for 0.1 second.
Remedy: 1.Replace the Additional Tray Clock Sensor (S23). 2.Replace the Additional Tray Lift Motor (M12). 3.Replace the Finisher Controller PCB (PCB1).

Code: E567-0001

Description: Shift Roller Release Motor (M5) error
The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec.
Remedy: 1.Replace the Shift Roller Release Sensor (S3). 2.Replace the Shift Roller Release Motor (M5). 3.Replace the Finisher Controller PCB (PCB1).

Code: E567-0002

Description: Shift Roller Release Motor (M5) error
The shift roller does not return to the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.06 sec.
Remedy: 1.Replace the Shift Roller Release Sensor (S3). 2.Replace the Shift Roller Release Motor (M5). 3.Replace the Finisher Controller PCB (PCB1).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie