• Code: E540-0001
• Description: Tray Lift Motor (M11) time out error
  The stack tray does not move within a specified time period.
• Remedy: 1.Replace the Tray Lift Motor (M11). 2.Replace the Finisher Controller PCB (PCB1).

• Code: E540-0005
• Description: Tray Lift Motor (M11) closing detect switch error
  The FG input cannot be detected when the Tray Lift Motor (M11) has been driven for 0.1 second.
• Remedy: 1.Replace the Stack Tray Clock Sensor (S13). 2.Replace the Tray Lift Motor (M11). 3.Replace the Finisher Controller PCB (PCB1).

• Code: E542-0001
• Description: Additional Tray Lift Motor (M12) time out error
  The stack tray does not move within a specified time period.
• Remedy: 1.Replace the Additional Tray Lift Motor (M12). 2.Replace the Finisher Controller PCB (PCB1).

• Code: E542-0005
• Description: Additional Tray Lift Motor (M12) closing detect switch error
  The FG input cannot be detected when the Additional Tray Lift Motor (M12) has been driven for 0.1 second.
• Remedy: 1.Replace the Additional Tray Clock Sensor (S23). 2.Replace the Additional Tray Lift Motor (M12). 3.Replace the Finisher Controller PCB (PCB1).

• Code: E567-0001
• Description: Shift Roller Release Motor (M5) error
  The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec.
• Remedy: 1.Replace the Shift Roller Release Sensor (S3). 2.Replace the Shift Roller Release Motor (M5). 3.Replace the Finisher Controller PCB (PCB1).

• Code: E567-0002
• Description: Shift Roller Release Motor (M5) error
  The shift roller does not return to the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.06 sec.
• Remedy: 1.Replace the Shift Roller Release Sensor (S3). 2.Replace the Shift Roller Release Motor (M5). 3.Replace the Finisher Controller PCB (PCB1).

• Code: E571-0001
• Description: Gripper Open/Close Motor (M7) error
  The gripper unit does not leave the gripper unit home position when the Gripper Open/Close Motor (M7) has been driven for 0.25 seconds.
• Remedy: 1.Replace the Grip Arm Sensor (S13). 2.Replace the Gripper Open/Close Motor (M7). 3.Replace the Finisher Controller PCB (PCB1).

• Code: E571-0002
• Description: Gripper Open/Close Motor (M7) error
  The gripper unit does not return to the gripper unit home position when the Gripper Open/Close Motor (M7) has been driven for 0.15 seconds.
• Remedy: 1.Replace the Grip Arm Sensor (S13). 2.Replace the Gripper Open/Close Motor (M7). 3.Replace the Finisher Controller PCB (PCB1).