• Code: E719-0012
• Description: There is a coin vendor error.
  An IPC error has occurred at new card reader startup. There is an IPC open circuit. An error has occurred that prevents recovery of IPC communication.
• Remedy: Check the cable; thereafter, reset the condition in service mode: COPIER>FUNCTION>CLEAR> ERR.

• Code: E730-1001
• Description: There is a PDL software error
  An initialization error has occurred.
• Remedy: 1. Execute PDL resetting. 2. Turn on the power once again.

• Code: E730-100A
• Description: There is a PDL software error
  An error that may be critical to the system (e.g., failed initialization) has occurred.
• Remedy: 1. Execute PDL resetting. 2. Turn on the power once again.

• Code: E730-9004
• Description: There is a PDL software error
  There is an error in the communication (PAI) with an external controller.
• Remedy: 1. Turn on the power once main. 2. Check the connection of the open I/F board and the cable. 3. Replace the board for the external controller open I/F. 4. Replace the main board.

• Code: E730-9005
• Description: There is a PDL software error
  There is a fault in the connector of the vide cable to the external controller
• Remedy: 1. Turn on the power once main. 2. Check the connection of the open I/F board and the cable. 3. Replace the board for the external controller open I/F. 4. Replace the main board.

• Code: E730-A006
• Description: There is a PDL software error
  The PDL board does not respond. A subbootable is faulty or absent
• Remedy: 1. Execute PDL resetting. 2. Turn on the power once again. 3. Check the connection of the SURF board. 4. Re-install the firmware. 5. Replace the main board.

• Code: E730-A007
• Description: There is a PDL software error
  There is a mismatch between the control software of the machine and the PDL control software in regard to version.
• Remedy: 1. Execute PDL resetting. 2. Turn on the power once again. 3. Execute system formatting (all), and reinstall the system.

• Code: E730-B013
• Description: There is a PDL software error
  There is corruption in the font data.
• Remedy: 1. Turn on the power once again. 2. Re-install the software. 3. Execute system formatting (all), and reinstall the system.