Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR2870 — Trang 10/24

Code: E535-0002

Description: Swing cam error (Finisher-S1)
The home position sensor does not go off within 1.0 sec when the stack delivery roller swing arm is moved from home position.
Remedy: Replace the finisher controller PCB. Replace the swing cam motor. Check the swing cam home position sensor. Check the harness.

Code: E535-0002

Description: Swing cam error (Finisher-Q3/ Q4)
The home position sensor does not go on even when the swing motor has rotated for a specific period of time
Remedy: Replace the finisher controller PCB. Replace the swing cam motor. Check the swing cam home position sensor. Check the harness.

Code: E537-0001

Description: Rear alignment error (Finisher-Q3/ Q4)
The home position sensor does not go on within 2000 msec after the start of operation when the read aligning plate is moved to home position.
Remedy: Replace the finisher controller PCB. Replace the rear alignment motor. Check the rear aligning plate drive mechanism. Check the rear alignment home position sensor.

Code: E537-0002

Description: Rear alignment error (Finisher-Q3/ Q4)
The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is moved form home position.
Remedy: Replace the finisher controller PCB. Replace the rear alignment motor. Check the rear aligning plate drive mechanism. Check the rear alignment home position sensor.

Code: E537-8001

Description: Front alignment error (Finisher-S1)
The home position sensor does not go on within 2.0 sec when the front aligning plate is moved to home position.
Remedy: Replace the finisher controller PCB. Replace the front alignment motor. Check the front aligning plate drive mechanism. Check the front alignment home position sensor.

Code: E537-8002

Description: Front alignment error (Finisher-S1)
The home position sensor dos not go off within 1.0 sec when the front aligning plate is shifted from home position.
Remedy: Replace the finisher controller PCB. Replace the front alignment motor. Check the front aligning plate drive mechanism. Check the front alignment home position sensor.

Code: E540-0002

Description: Upper tray ascent/descent motor error (Finisher -Q3/ Q4)
Upper tray ascent/descent motor clock error
Remedy: Replace the No. 1 tray shift motor. Replace the finisher controller PCB. Check the tray ascent/descent mechanism.

Code: E540-0003

Description: Upper tray ascent/descent motor error (Finisher -Q3/ Q4)
Area error
Remedy: Replace the No. 1 tray area sensor PCB. Replace the finisher controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie