Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR2870 — Trang 12/24

Code: E584-0002

Description: Shutter unit error (Finisher-Q3/ Q4)
The shutter open sensor does not go on (i.e., the shutter does not open).
Remedy: Check the stack edging motor. Check the open/ close clutch. Check the shutter home position sensor. Replace the finisher controller PCB.

Code: E590-0001

Description: Punch motor error
The punching home position is not detected even when the puncher motor has been driven for 20 msec.
Remedy: Check the punch motor. Check the punch motor clock sensor. Check the punch driver PCB. Replace the finisher controller PCB.

Code: E590-0002

Description: Punch motor error
The punch home position sensor is not defected even after the motor has stopped at time of punch motor initial operation.
Remedy: Check the punch motor. Check the punch motor clock sensor. Check the punch driver PCB. Replace the finisher controller PCB.

Code: E591-0001

Description: Punch dust sensor error
Error in light-receiving voltage while light is emitted
Remedy: Check the waste paper case full sensor. Check the punch driver PCB. Replace the finisher controller PCB.

Code: E591-0002

Description: Punch dust sensor error
Error in light-receiving voltage while light is not emitted
Remedy: Check the waste paper case full sensor. Check the punch driver PCB. Replace the finisher controller PCB.

Code: E592-0001

Description: Paper trailing edge sensor/ horizontal sensor error
Error in light-receiving voltage when light is emitted (trailing edge sensor)
Remedy: Check the paper trailing edge sensor. Check the horizontal registration sensor. Check the punch driver PCB. Replace the finisher controller PCB.

Code: E592-0002

Description: paper trailing edge sensor/ registration sensor error
Error in light-receiving voltage when light is not emitted (trailing edge sensor)
Remedy: Check the paper trailing edge sensor. Check the horizontal registration sensor. Check the punch drive PCB. Replace the finisher controller PCB.

Code: E592-0003

Description: Power trailing edge sensor/ registration sensor
Error in light-receiving voltage when light is emitted (horizontal registration sensor 1)
Remedy: Check the paper trailing edge sensor. Check the horizontal registration sensor. Check the punch driver PCB. Replace the finisher controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie