Description: There is a coin vendor error.
An IPC error has occurred at new card reader startup. There is an IPC open circuit. An error has occurred that prevents recovery of IPC communication.
Remedy: Check the cable; thereafter, reset the condition in service mode: COPIER>FUNCTION>CLEAR> ERR.
Description: There is a PDL software error
There is an error in the communication (PAI) with an external controller.
Remedy: 1. Turn on the power once main. 2. Check the connection of the open I/F board and the cable. 3. Replace the board for the external controller open I/F. 4. Replace the main board.
Description: There is a PDL software error
There is a fault in the connector of the vide cable to the external controller
Remedy: 1. Turn on the power once main. 2. Check the connection of the open I/F board and the cable. 3. Replace the board for the external controller open I/F. 4. Replace the main board.
Description: There is a PDL software error
The PDL board does not respond. A subbootable is faulty or absent
Remedy: 1. Execute PDL resetting. 2. Turn on the power once again. 3. Check the connection of the SURF board. 4. Re-install the firmware. 5. Replace the main board.
Description: There is a PDL software error
There is a mismatch between the control software of the machine and the PDL control software in regard to version.
Remedy: 1. Execute PDL resetting. 2. Turn on the power once again. 3. Execute system formatting (all), and reinstall the system.