Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3030 — Trang 8/24

Code: E519-0001

Description: Gear change motor error (Finisher-Q3/ Q4)
The home position sensor does not go off even when the gear change motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the gear change motor. Check the gear change mechanism.

Code: E519-0002

Description: Gear change motor error (Finisher-Q3/ Q4)
The home position sensor does not go on even when the gear change motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the gear change motor. Check the gear change mechanism.

Code: E530-0001

Description: Front alignment error (Finisher-Q3/ Q4)
The home position sensor does not go off even when the front alignment motor has been rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the front alignment motor. Check the front aligning plate drive mechanism. Check the front alignment home position sensor.

Code: E530-0002

Description: Front alignment error (Finisher-Q3/ Q4)
The home position sensor does not go on even when the front alignment motor has been rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the front alignment motor. Check the front aligning plate drive mechanism. Check the front alignment home position sensor.

Code: E530-8001

Description: Rear alignment error (Finisher-S1)
The home position sensor does not go on within 2000 msec after the start of operation when the rear aligning plate is shifted to home position.
Remedy: Replace the finisher controlled PCB. Replace the rear alignment motor. Check the rear aligning plate drive mechanism. Check the rear alignment home position sensor.

Code: E530-8002

Description: Rear alignment error (Finisher-S1)
The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
Remedy: Replace the finisher controlled PCB. Replace the rear alignment motor. Check the rear aligning plate drive mechanism. Check the rear alignment home position sensor.

Code: E531-0001

Description: Stapler error (Finisher-Q3/Q4)
The home position sensor does not go off even when the stapler motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the stapler. Check the harness.

Code: E531-0002

Description: Stapler error (Finisher-Q3/Q4)
The home position sensor does not go on even when the stapler motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the stapler. Check the harness.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie