Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3100CN — Trang 22/27

Code: E5F8-0001

Description: Saddle connector error
Disconnection of the guide HP sensor connector is detected.
Remedy: Disconnect and then connect the guide HP sensor (PI13S) connector

Code: E5F8-0002

Description: Saddle connector error
Disconnection of the paper pressure plate HP sensor connector is detected.
Remedy: Disconnect and then connect the paper pressure plate HP sensor (PI14S) connector

Code: E5F8-0003

Description: Saddle connector error
Disconnection of the paper pressure plate leading edge sensor connector is detected.
Remedy: Disconnect and then connect the paper pressure plate leading edge sensor (PI15S) connector

Code: E5F9-0001

Description: Saddle switch error
Open of the inlet cover is detected for 1 sec. or more after the host machine starts initial rotation/printing while the following sensors detect their covers closed. - Inlet cover sensor (PI9S) - Front cover open/close sensor (PI2S) - Delivery cover sensor (PI3S) Or, the front cover switch (MS2S) or the delivery cover switch (MS3S) is open.
Remedy: Replace the inlet cover switch (MS1S), Replace the front cover switch (MS2S), Replace the delivery cover switch (MS3S)

Code: E5F9-0002

Description: Saddle switch error
Open of the front cover switch is detected for 1 sec. or more after the host machine starts initial rotation/printing while the following sensors detect their covers closed. - Inlet cover sensor (PI9S) - Front cover open/close sensor (PI2S) - Delivery cover sensor (PI3S)
Remedy: Replace the front cover switch (MS2S), Replace the delivery cover switch (MS3S)

Code: E5F9-0003

Description: Saddle switch error
Open of the delivery cover switch is detected for 1 sec. or more after the host machine starts initial rotation/printing while the following sensors detect their covers closed. - Inlet cover sensor (PI9S) - Front cover open/close sensor (PI2S) - Delivery cover sensor (PI3S) - Delivery cover switch (MS3S)
Remedy: Replace the inlet cover switch (MS1S), Replace the front cover switch (MS2S), Replace the delivery cover switch (MS3S)

Code: E601-0000

Description: Abnormality of image memory
Communication error of the image memory (SDRAM)
Remedy: Replace the SDRAM

Code: E602

Description: Hard disk error
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie