Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3100CN — Trang 24/27

Code: E711-0002

Description: IPC communication error
Error is detected 4 times or more within 1.5 sec. after communication between the finisher and the printer stops, and recovery ends in failure.
Remedy: Check on connection of the cable, Replace the finisher controller PCB, Replace the DC controller PCB

Code: E712-0001

Description: Communication error between the ADF and the reader
Communication between the reader and the ADF stops, and the communication cannot recover for 5 sec. or more.
Remedy: Check on connection of the cable, Replace the ADF controller PCB, Replace the reader controller PCB

Code: E713-0000

Description: Communication error between the finisher and the printer
Communication between the finisher and the copier stops.
Remedy: Check on connection of the cable, Replace the finisher controller PCB, Replace the DC controller PCB

Code: E717-0001

Description: Communication error with the NE controller
The NE controller connected before the power is turned off fails to be recognized at power-on.
Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR

Code: E717-0002

Description: Communication error with the NE controller
A break in the IPC, IPC communication fails to recover
Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR

Code: E719-0001

Description: Communication error with the coin vender/card reader
The coin vender connected before the power is turned off fails to be recognized at power-on.
Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR

Code: E719-0002

Description: Communication error with the coin vender/card reader
- A break in the IPC cable connected to the coin vender, IPC communication fails to recover - A break in the paper pickup/delivery signal line - Incorrect connection is detected (Short circuit in Tx and Rx of IPC)
Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR

Code: E719-0011

Description: Communication error with the coin vender/card reader
The card reader connected before the power is turned off fails to be recognized at power-on.
Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie