Description: IPC communication error
Error is detected 4 times or more within 1.5 sec. after communication between the finisher and the printer stops, and recovery ends in failure.
Remedy: Check on connection of the cable, Replace the finisher controller PCB, Replace the DC controller PCB
Description: Communication error between the ADF and the reader
Communication between the reader and the ADF stops, and the communication cannot recover for 5 sec. or more.
Remedy: Check on connection of the cable, Replace the ADF controller PCB, Replace the reader controller PCB
Description: Communication error with the coin vender/card reader
The coin vender connected before the power is turned off fails to be recognized at power-on.
Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR
Description: Communication error with the coin vender/card reader
- A break in the IPC cable connected to the coin vender, IPC communication fails to recover - A break in the paper pickup/delivery signal line - Incorrect connection is detected (Short circuit in Tx and Rx of IPC)
Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR
Description: Communication error with the coin vender/card reader
The card reader connected before the power is turned off fails to be recognized at power-on.
Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.