• Code: E719-0012
• Description: Communication error with the coin vender/card reader
  A break in the IPC cable connected to the card reader, IPC communication fails to recover
• Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR

• Code: E730
• Description: PDL error
• Remedy: Reset PDL, Turn OFF and back ON the main power, Format and re-install the whole system. Replace the main controller PCB

• Code: E731
• Description: UFR PCB error
• Remedy: Check on connection of the UFR PCB, Replace the UFR PCB, Replace the main controller PCB

• Code: E732-0001
• Description: Reader communication error
  DDI-S communication error
• Remedy: Check on connection between the reader controller PCB and the main controller PCB, Check on the reader power supply

• Code: E733-0000
• Description: Printer communication error
  The printer fails to be detected at startup.
• Remedy: Check on connection between the DC controller PCB and the main controller PCB, Check on the printer power supply

• Code: E733-0001
• Description: Printer communication error
  DDI-P communication error
• Remedy: Check on connection between the DC controller PCB and the main controller PCB, Check on the printer power supply

• Code: E740-0002
• Description: Abnormality of the Ethernet board
  Incorrect MAC address is detected at start-up
• Remedy: Replace the Ethernet board, Replace the main controller PCB (sub LAN-bar)

• Code: E740-0003
• Description: Abnormality of the Ethernet board
  Incorrect network ID is detected at startup.
• Remedy: Replace the Ethernet board, Replace the main controller PCB (sub LAN-bar)