• Code: E719-0031
• Description: There is a coin vendor error.
  Error in communication at card reader (serial) startup Communication with the card reader cannot be started at startup.
• Remedy: 1. Check the connection of the cable for the card reader (connector disconnected, cable cut); thereafter, reset the condition in service mode: COPIER > FUNCTION > CLEAR > ERR. 2. Execute the following items in service mode after removing the card reader, and then install the card reader again. - COPIER > FUNCTION > CLEAR > CARD - COPIER > FUNCTION > CLEAR > ERR

• Code: E719-0032
• Description: There is a coin vendor error.
  Error in communication after card reader (serial) startup Communication with the card reader is available at startup, and then becomes unavailable.
• Remedy: Check the connection of the cable for the card reader (connector disconnected, cable cut); thereafter, reset the condition in service mode: COPIER > FUNCTION > CLEAR > ERR.

• Code: E730-1001
• Description: There is a PDL software error.
  An initialization error has occurred.
• Remedy: 1. Execute PDL resetting. 2. Turn on the power once again.

• Code: E730-100A
• Description: There is a PDL software error.
  An error that may be critical to the system (e.g., failed initialization) has occurred.
• Remedy: 1. Execute PDL resetting. 2. Turn on the power once again.

• Code: E730-9004
• Description: There is a PDL software error.
  There is an error in the communication (PAI) with an external controller.
• Remedy: 1. Turn on the power once main. 2. Check the connection of the open I/F board and the cable. 3. Replace the board for the external controller open I/F. 4. Replace the main board.

• Code: E730-9005
• Description: There is a PDL software error.
  There is a fault in the connector of the vide cable to the external controller.
• Remedy: 1. Turn on the power once main. 2. Check the connection of the open I/F board and the cable. 3. Replace the board for the external controller open I/F. 4. Replace the main board.

• Code: E730-A006
• Description: There is a PDL software error.
  The PDL board does not respond. A subbootable is faulty or absent.
• Remedy: 1. Execute PDL resetting. 2. Turn on the power once again. 3. Check the connection of the SURF board. 4. Re-install the firmware. 5. Replace the main board.

• Code: E730-A007
• Description: There is a PDL software error.
  There is a mismatch between the control software of the machine and the PDL control software in regard to version.
• Remedy: 1. Execute PDL resetting. 2. Turn on the power once again. 3. Execute system formatting (all), and reinstall the system.