• Code: E315-0551
• Description: There is an error in image data.
  Device: abnormal termination error [Location to be detected] image process module (PRIP) [Detection timing] when abnormal interruption is detected after the operation has been started.
• Remedy: Check connection with DDI-P cable(DCON). Replace the main controller PCB.

• Code: E315-0560
• Description: There is an error in image data.
  Device: timeout error [Location to be detected] image process module (PRIO) [Detection timing] when there is no interruption 2 min after the operation has been started.
• Remedy: Check connection with DDI-P cable(DCON). Replace the main controller PCB.

• Code: E315-0561
• Description: There is an error in image data.
  Device: abnormal termination error [Location to be detected] image process module (PRIO) [Detection timing] when abnormal interruption is detected after the operation has been started.
• Remedy: Check connection with DDI-P cable(DCON). Replace the main controller PCB.

• Code: E400-0001
• Description: Fault in communication with the ADF driver PCB
  The checksum values of data from the ADF driver PCB are inconsistent 14 times consecutively.
• Remedy: Check connection of ADF lattice cable (cleaning of connecting point). Replace ADF driver PCB. Replace the reader controller PCB.

• Code: E400-0002
• Description: The statuses of data from the ADF driver PCB are inconsistent 14 times consecutively.
• Remedy: Check connection of ADF lattice cable (cleaning of connecting point). Replace ADF driver PCB. Replace the reader controller PCB.

• Code: E400-0003
• Description: SCI serial communication error interrupt is detected 14 times consecutively.
• Remedy: Check connection of ADF lattice cable (cleaning of connecting point). Replace ADF driver PCB. Replace the reader controller PCB.

• Code: E413-0001
• Description: The level of the pressure HP sensor does not change in a specified period of time.
  When the pressure motor is activated, the level of the pressure HP sensor does not change in a specified period of time with the lead roller opened.
• Remedy: Replace the pressure motor. Replace the pressure HP sensor.

• Code: E413-0002
• Description: The level of the pressure HP sensor does not change in a specified period of time.
  When the pressure motor is activated, the level of the pressure HP sensor does not change in a specified period of time with the lead roller closed.
• Remedy: Replace the pressure motor. Replace the pressure HP sensor.