Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3230 — Trang 18/30

Code: E5F1-0002

Description: Saddle paper folding error
The state of the paper folding home position sensor doest not change when the paper folding motor has been driven for 3 sec. Paper folding motor (M2S)/paper folding motor clock sensor (P14S)
Remedy: Check the paper folding motor. Check the paper folding motor clock sensor. Replace the finisher controller PCB. Check the paper folding plate drive mechanism.

Code: E5F2-0001

Description: Saddle guide error
The guide home position sensor does not go on when the guide motor has been driven for 0.455 sec. Guide motor (M3S)/guide home position sensor (PI13S)
Remedy: Check the guide motor. Check the guide home position sensor. Replace the finisher controller PCB. Check the guide drive mechanism.

Code: E5F2-0002

Description: Saddle guide error
The guide home position sensor does not go off when the guide motor has been driven for 1 sec. Guide motor (M3S)/guide home position sensor (PI13S)
Remedy: Check the guide motor. Check the guide home position sensor. Replace the finisher controller PCB. Check the guide drive mechanism.

Code: E5F3-0001

Description: Saddle alignment error
The aligning plate home position sensor does not go on when the alignment motor has been driven for 0.5 sec. (at time of initialization, 1.67 sec.) Alignment motor (M5S)/aligning plate home position sensor (PI5S)
Remedy: Check the alignment motor. Check the alignment home position sensor. Check the aligning plate drive mechanism. Replace the finisher controller PCB.

Code: E5F3-0002

Description: Saddle alignment error
The aligning plate home position sensor does not go off when the alignment motor has been driven for 1 sec. Alignment motor (M5S)/aligning plate home position sensor (PI5S)
Remedy: Check the alignment motor. Check the alignment home position sensor. Check the aligning plate drive mechanism. Replace the finisher controller PCB.

Code: E5F4-0001

Description: Saddle rear stapling error
The stitching home position sensor does not go on when the stitch motor (rear) has been rotated in reverse for 0.5 sec or more. Stitch motor (rear; M6S)/stitching home position sensor (rear; MS5S)
Remedy: Replace the stitcher (rear). Check the harness. Replace the finisher controller PCB.

Code: E5F4-0002

Description: Saddle rear stapling error
The stitching home position sensor does not go off when the stitch motor (rear) has been rotated in normal direction for 0.5 sec or more. Stitch motor (rear; MS)/stitching home position sensor (rear; MS5S)
Remedy: Replace the stitcher (rear). Check the harness. Replace the finisher controller PCB.

Code: E5F5-0001

Description: Saddle front stapling error
The stitching home position sensor does not go on when the stitch motor (front) has been rotated in reverse for 0.5 sec or more. Stitch motor (front; M7S)/stitching home position sensor (front; MS7S)
Remedy: Replace the stitcher (front). Check the harness. Replace the finisher controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie