Description: There is an error in the communication with the scanner
There is a DDI-S communication error.
Remedy: 1. Check the connector used to connect the scanner. 2. Check the power supply of the scanner (to see if initialization takes place at startup). 3. Replace the reader controller, scanner board, or main board as necessary.
Description: There is an error in the communication with the scanner
Fault in detection of DDI-S Vsync signal
Remedy: 1. Check the connector used to connect the scanner. 2. Check the power supply of the scanner (to see if initialization takes place at startup). 3. Replace the reader controller, scanner board, or main board as necessary.
Description: There is an error in the communication with the scanner
A scanner is first detected from the printer model. (Not an error code but only the message 'Turn the main power switch OFF&ON again' is displayed on the users screen. The error is recorded in service mode > DISPLAY > ERR
Description: There is an error in the communication with the printer
At startup, communication with the printer fails
Remedy: 1. Check the connector used to connect to the printer. 2. Check the power supply of the printer (to see if initialization takes place at startup). 3. Replace the DC controller or the main board.
Description: There is an error in the communication with the printer
There is a DDI-P communication error
Remedy: 1. Check the connection with the printer. 2. Check the power supply of the printer (to see if initialization takes place at startup). 3. Replace the DC controller or the main board.
Description: There is an error in the communication with the printer
Fault in detection of DDI-P Vsync signal
Remedy: 1. Check the connection with the printer. 2. Check the power supply of the printer (to see if initialization takes place at startup). 3. Replace the DC controller or the main board.