Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3235 — Trang 29/30

Code: E748-2000

Description: There is a mismatch between controller board and SDRAM size.
An error occurs when accessing the chip on the main controller PCB.
Remedy: Replace the main controller PCB.

Code: E748-2001

Description: There is a mismatch between controller board and SDRAM size.
An error occurs when accessing the memory on the main controller PCB.
Remedy: 1. Unplug/plug in the memory. 2. Replace the main controller PCB.

Code: E748-4910

Description: There is a mismatch between controller board and SDRAM size.
A controller board that does not match the product is defected.
Remedy: - Replace the main controller PCB.

Code: E804-0000

Description: Error in power supply cooling fan
Failure in power supply cooling fan (while the fan is not working) When lock signal is detected for 5 sec while the fan is stopped.
Remedy: - Disconnect and then connect the connector (J303) on DC controller PCB. - Replace the power supply cooling fan - Replace DC controller PCB

Code: E804-0001

Description: Error in power supply cooling fan
Failure in rotation of power supply cooling fan When lock signal failed to be detected for 5 sec while the fan is driven.
Remedy: - Disconnect and then connect the connector (J303) on DC controller PCB. - Replace the power supply cooling fan - Replace DC controller PCB

Code: E805-0000

Description: There is a fan error.
Failure in heat exhaust fan (front) (FM2) When lock signal is detected for 5 sec while the fan is stopped.
Remedy: - Replace the heat exhaust fan (front) - Replace DC controller PCB.

Code: E805-0001

Description: There is a fan error.
Failure in rotation of heat exhaust fan (front) (FM2) When lock signal failed to be detected for 5 sec while the fan is driven.
Remedy: - Replace the heat exhaust fan (front) - Replace DC controller PCB

Code: E805-0002

Description: There is a fan error.
Failure in heat exhaust fan (rear) (FM1) When lock signal is detected for 5 sec while the fan is stopped.
Remedy: - Replace the heat exhaust fan (rear) - Replace DC controller PCB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie