Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3245 — Trang 25/30

Code: E719-0031

Description: There is a coin vendor error.
Error in communication at card reader (serial) startup Communication with the card reader cannot be started at startup.
Remedy: 1. Check the connection of the cable for the card reader (connector disconnected, cable cut); thereafter, reset the condition in service mode: COPIER > FUNCTION > CLEAR > ERR. 2. Execute the following items in service mode after removing the card reader, and then install the card reader again. - COPIER > FUNCTION > CLEAR > CARD - COPIER > FUNCTION > CLEAR > ERR

Code: E719-0032

Description: There is a coin vendor error.
Error in communication after card reader (serial) startup Communication with the card reader is available at startup, and then becomes unavailable.
Remedy: Check the connection of the cable for the card reader (connector disconnected, cable cut); thereafter, reset the condition in service mode: COPIER > FUNCTION > CLEAR > ERR.

Code: E730-1001

Description: There is a PDL software error.
An initialization error has occurred.
Remedy: 1. Execute PDL resetting. 2. Turn on the power once again.

Code: E730-100A

Description: There is a PDL software error.
An error that may be critical to the system (e.g., failed initialization) has occurred.
Remedy: 1. Execute PDL resetting. 2. Turn on the power once again.

Code: E730-9004

Description: There is a PDL software error.
There is an error in the communication (PAI) with an external controller.
Remedy: 1. Turn on the power once main. 2. Check the connection of the open I/F board and the cable. 3. Replace the board for the external controller open I/F. 4. Replace the main board.

Code: E730-9005

Description: There is a PDL software error.
There is a fault in the connector of the vide cable to the external controller.
Remedy: 1. Turn on the power once main. 2. Check the connection of the open I/F board and the cable. 3. Replace the board for the external controller open I/F. 4. Replace the main board.

Code: E730-A006

Description: There is a PDL software error.
The PDL board does not respond. A subbootable is faulty or absent.
Remedy: 1. Execute PDL resetting. 2. Turn on the power once again. 3. Check the connection of the SURF board. 4. Re-install the firmware. 5. Replace the main board.

Code: E730-A007

Description: There is a PDL software error.
There is a mismatch between the control software of the machine and the PDL control software in regard to version.
Remedy: 1. Execute PDL resetting. 2. Turn on the power once again. 3. Execute system formatting (all), and reinstall the system.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie