Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3245 — Trang 26/30

Code: E730-B013

Description: There is a PDL software error.
There is corruption in the font data.
Remedy: 1. Turn on the power once again. 2. Re-install the software. 3. Execute system formatting (all), and reinstall the system.

Code: E732-0001

Description: There is an error in the communication with the scanner
There is a DDI-S communication error.
Remedy: 1. Check the connector used to connect the scanner. 2. Check the power supply of the scanner (to see if initialization takes place at startup). 3. Replace the reader controller, scanner board, or main board as necessary.

Code: E732-0010

Description: There is an error in the communication with the scanner
Fault in detection of DDI-S Vsync signal
Remedy: 1. Check the connector used to connect the scanner. 2. Check the power supply of the scanner (to see if initialization takes place at startup). 3. Replace the reader controller, scanner board, or main board as necessary.

Code: E732-9999

Description: There is an error in the communication with the scanner
A scanner is first detected from the printer model. (Not an error code but only the message 'Turn the main power switch OFF&ON again' is displayed on the users screen. The error is recorded in service mode > DISPLAY > ERR
Remedy: Turn the main power switch off/on

Code: E733-0000

Description: There is an error in the communication with the printer
At startup, communication with the printer fails
Remedy: 1. Check the connector used to connect to the printer. 2. Check the power supply of the printer (to see if initialization takes place at startup). 3. Replace the DC controller or the main board.

Code: E733-0001

Description: There is an error in the communication with the printer
There is a DDI-P communication error
Remedy: 1. Check the connection with the printer. 2. Check the power supply of the printer (to see if initialization takes place at startup). 3. Replace the DC controller or the main board.

Code: E733-0010

Description: There is an error in the communication with the printer
Fault in detection of DDI-P Vsync signal
Remedy: 1. Check the connection with the printer. 2. Check the power supply of the printer (to see if initialization takes place at startup). 3. Replace the DC controller or the main board.

Code: E733-0020

Description: There is an error in the communication with the printer
Error in DDI-P communication
Remedy: 2. Check the power supply of the printer (to see if initialization takes place at startup). 3. Replace the DC controller or the main board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie