Mã lỗi Canon iR3570 — Trang 6/24
Description: There is an error in image data.
There is an error in JBIG encoding.
Remedy: Turn off and then back on the power.
Description: There is an error in image data.
There is an error in JBIG decoding.
Remedy: Turn off and then back on the power.
Description: DF communication error
Check sum error
Remedy: Disconnect and then connect the connector. Replace the reader controller PCB. Replace the ADF controller PCB.
Description: DF communication error
Reception status error
Remedy: Disconnect and then connect the connector. Replace the reader control PCB. Replace the ADF control PCB.
Description: DF communication error
Reception interrupt error
Remedy: Disconnect and then connect the connector. Replace the reader controlled PCB. Replace the ADF controller PCB.
Description: Wrong DF
The installed DF is not of a supported type.
Remedy: Install an ADF that is compatible with the machine.
Description: Finisher communication error
Data communication could not be performed normally. It has been retried three times in vain.
Remedy: Replace the finisher controller PCB. Replace the DC controller PCB.
Description: fault in communicatio n with the finisher (Finisher-Q3/ Q4)
Remedy: